| Year: |
1961 |
| Make: |
Zvezda |
| Model: |
Motoryacht |
| Length: |
122 Feet |
| Engine: |
Inboard |
| Fuel: |
Diesel |
| Hull: |
Wood |
| Location: |
Ukraine |
| Price: |
USD 1,308,472 |
| Comment: |
Very Good |
| Status: |
Active |
|
|
|
| Description |
|
Located in the Ukraine !!!!A very unique motor yacht for sale!!!!
A yacht was constructed by the special project 360, projected in CKB-5 and built at the plant of LNSKH # 5 in Leningrad, in 1961, in the USSR, for the top management of country.
the greatest length - 37.20 m
constructive vater-line - 34.50 m
the width - 7.5 m
the height of the board - 3.4 m
vessel deposit empty - 1.6 m
vessel deposit loaded - 1.8 m
vessel deposit up to screws - 2.3 m
displacement full - 148 tons
displacement empty - 135 tons
speed full - 30.7 knots
speed cruiser - 26 knots
range of swimming - 380 miles
portability - 3 days
crew - 4 persons
passengers - 6 persons
main engine M503A3 - 2 pcs. , the power 400 l/sec, 2000 turns per minute, the factory "ZVEZDA"
The corps of yacht is collected on the transversal system. Space in nasal part to 28 shp. makes 300 mm, further in a stern - 400 mm.
A stem is the pine squared beam of variable section, pasted on a thickness from boards, the keel of variable height is breadthways 240 mm executed on an analogical chart.
Bends, balks and bars of partitions are pasted with laths and boards. External last of the bends are with oak, middle are pine-trees, internal from a larch. Frame bends - steel, double-T and box-type section.
Edging of bottom is three-layered: external - diagonal, from a larch in 16 mm thick, middle diagonal from a pine-tree 10 mm, internal longitudinal from a pine-tree in 16 mm. thick.
The boards consist of two diagonally located layers of pine boards in 16 mm. thick Between the layers of edging for providing of watertightness the layer of fabric, saturated with the special mastic, is fixed.
Partitions are made from birch plywood, and a set and edging of building on and deck-house presents difficult composition from steel, pine-tree and birch plywood.
For connection of elements of construction brass and copper location bracketry was used: screw-bolts, screws, nails. In a motor compartment set two four-stroke, single-acting with the supercharge of diesel of M503A3 (power of 4000 l/s, 2000 ob/min, factory manufacturer «Zvezda») and two diesel - generator, by power 75 and 36 kW (power 150 and 60 l/s, 1500 ob/min, tension of 220V is 50 Hertzs).
The engines are two trilobate mushroom screws by a diameter for 1,11 m.
CLICK HERE for a photo gallery
CLICK HERE for a complete list of specifications
Disclaimer: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
|
|
|
|
| |
|
|