Related Searches

1984 48 (ft.) Rhodes McMullen and Wing

Inactive - This listing is not for sale at this time

General Information

Listing# 118543

Price
$450,000.00
Location
Auckland, New Zealand
Manufacturer
Rhodes McMullen and Wing
Boat Type
Sailboat
Model Year
1984
Category
Cruisers
Designer
Phillip Rhodes
Status
Used
Length
48 (ft.)
Beam
13
LOA
50
Hull Material
Aluminum
Fuel Type
Diesel
Number of Engines
1
Engine Type
Inboard

General Details

Custom built aluminum hull by one of the principles of McMullen and Wing in New Zealand. CICERO is a sistership to the famous Rhodes cutter, THUNDERHEAD. Beautifully crafted mahogany interior, two cabin 6/7 berth layout, centerboard (draft 5’6”and 10ft.), B&G instruments, Navtec hydraulics, Hundestad variable pitch prop, Furuno plotter/radar/weather fax. Set up for shorthanded sailing with electric furler. Lewmar 65's for all four cockpit winches and two autopilots. Recent upgrades include Awlgrip paint, Treadmaster decks and Lidgard sails. 

Ready to cruise.

Specifications

GALLEY
Fridge/freezer
NAVIGATION AND ELECTRONICS
B & G instruments Furuno GPS plotter, weatherfax, radar (42mi)   (2) Autopilots (B & G and Nico)   Suunto world balanced compass   LED running lights
ENGINE AND MECHANICAL EQUIPMENT
(2) Edson bilge pumps Hot water heater
ELECTRICAL EQUIPMENT
600Amp/24Volt AGM house batteries (New 2012) High output alternator with smart charger 
DECK AND HULL
Variable pitch propeller (Hundestad) 75lb Rocna anchor, 50lb Herrshoff Kedge, 150lb three piece storm anchor  300ft 3/8” Hi-test anchor chain Tight fitted covers for all varnish 10' Hypalon roll up Inflatable 8hp 4stroke Honda outboard  9' Herrshoff rowing dinghy Isolated gas bottles/outboard fuel locker MOB pole/strobe/(2) horseshoe buoys  Emergency steering Givins 8-person life raft 
SAILS AND RIGGING
Main Jib  Stay sail Cruising chute w/sock (2) Spinnakers Light #1 Genoa Storm tri-sail Storm jib  Navtec hydraulics on vang and backstay
REMARKS
Custom built aluminum hull by one of the principles of McMullen and Wing in New Zealand. CICERO is a sistership to the famous Rhodes cutter, THUNDERHEAD. Beautifully crafted mahogany interior, two cabin 6/7 berth layout, centerboard (draft 5’6”and 10ft.), B&G instruments, Navtec hydraulics, Hundestad variable pitch prop, Furuno plotter/radar/weather fax. Set up for shorthanded sailing with electric furler. Lewmar 65's for all four cockpit winches and two autopilots. Recent upgrades include Awlgrip paint, Treadmaster decks and Lidgard sails.  Ready to cruise.
EXCLUSIONS
Potential purchasers should assume that items on the vessel at the time of viewing, but not specifically listed on this sheet, are not included with the sale of the yacht.  These specifications are believed to be true and correct but cannot be guaranteed.  
DISCLAIMER
Specifications and details of this vessel are provided in good faith for informational purposes only.  Data regarding the specifications, operating characteristics, and condition of the vessel was obtained from sources believed to be reliable but is not guaranteed by owner or brokers.  Buyer assumes responsibility to verify all speeds, capacities, consumptions and other measurements contained herein and otherwise provided and agrees to instruct his agent or surveyor to confirm such details prior to purchase.  Vessel is offered subject to prior sale, price and inventory changes and withdrawl from market without notice.
customContactInformation
For complete details, contact Listing Agent Todd Rittenhouse at (949) 642-5735 or e-mail:  rittenhouse@ardell.com