- 27 (ft.)
- Hull Material
- Fuel Type
- Engine Model
- E- Tec
- Number of Engines
- Engine Type
- Engine Hours
VIEW OUR 27 RIVERPOINT AT THE CHARLESTON IN-WATER BOAT SHOW
APRIL 25-27, 2014 AT BRISTOL MARINA & BRITTLEBANK PARK
This is a new (2014) vessel.
- Riverpoint Boatworks
- Riverpoint Boatworks Carolina Style Boats “Pocket yachts with big yacht looks and quality fit and finish!” Introduction Riverpoint Boatworks is proud to announce the acquisition of tooling to manufacture 25 to 30 ft. Carolina Style boats from Calyber Boatworks of Edenton, NC. The boats can be built as Center Consoles, Cuddy Cabins or Express Cruisers. Hull, deck, cockpit, console, stringers These boats, like all Riverpoints, are entirely constructed from composite materials (no wood). All fiberglass components, including the hull, center console and stringers are laid up by hand. The stringers are foam-filled for flotation and additional strength. The decking, flooring and transom are constructed from composite core materials. No component of a Riverpoint will ever rot. Hull design and construction These boat feature a sharp 60º entry extreme warped hull design producing a comfortable ride and legendary Carolina Boat sea conquering capabilities. The boats are constructed from hand-laid fiberglass in a split-mold and composites materials throughout. They are built with extreme attention to detail and a great deal of pride!
- Custom Blue Water Teak Helm Chair w/ Cover Custom Teak Helm Pod Schmidt Steering Wheel Custom T-Top with 9 rod holders Custom Teak Cockpit Sole Custom Teak Covering Boards Custom Teak Toe Rail Sea Foam Green Hull Color Four Gunwale mounted rod holder to be mounted in purchasers specified locations LED Running Lights Bow and Stern Cleats Raw Water Washdown Full Transom with Outboard Bracket 480 Quart Fishbox 35 Gallon Transom Fishbox Self-Bailing Cockpit Sea Star Hydraulic Steering Bennet Hydraulic Trim Tabs Transom Hawse Pipes and Cleats 3 Bilge Pumps 12 Volt Electrical System Breaker panel is custom made for Riverpoint Boatworks. All breakers are electro-hyraulic (no fuses) 3 AGM Batteries with Parallel Switch Twin 2013 Evinrude E-Tec 200 hp outboards w/ 3 year warranties Evinrude ICON system - an advanced, intelligent electronic shift and throttle system Hydraulic Porta Bracket (allowing for perfect placement of the props while running, facilitates running in shallow water and allows the motors to be lifted completely out of the water when docked - preventing electrolysis and growth on the lower units) Fuel Tanks: 2 Tanks (Forward tank 85 gal, Center tank 115 gal) 200 gallons total Fresh Water: 2 x 30 gal tanks for a total of 60 gal.
- 3500 RPM 26kts 14 GPH 3800 RPM 28kts 16 GPH 4000 RPM 30kts 20 PGH Top End 40kts
- The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.