Click here to check out the new BoatQuest website. New design, mobile and more! ➥

Related Searches

1977 26 (ft.) Sea Ray SRV 260 Sundancer

Save This Ad

General Information

Listing# 139947

Price
$17,500.00
Location
La Tuna Canyon, CA, United States
Manufacturer
Sea Ray
Boat Type
Powerboat
Model Year
1977
Category
Express Cruiser
Model
SRV 260 Sundancer
Status
Used
Length
26 (ft.)
Beam
96
LOA
312
Hull Material
Fiberglass
Fuel Type
unleaded
Engine Model
470
Number of Engines
2
Engine Type
Other
Engine Hours
103

General Details

The 1977 Sea Ray SRV260 Sundancer is a fantastic example of Sea Ray quality. This particular Sea Ray has only 103 original hours on the port engine and 61 hours on the starboard.

It's powered by twin Mercruiser 470's that are rumored to be good on gas mileage. The owner started them up and they run well. They have synthetic oil in them, but have not had an oil change since this owner has had the boat.

It's only been used twice in saltwater and has been kept in good running condition. It's also always been kept under cover when stored. This 1977 has a nice little galley area with an alcohol stove that's never been cooked on and a nice stainless steel sink The refrigerator has been removed as it was not working.

In the bow, the dinette turns into a nice sized V-berth when not being used with the table. A nice recirculating head amidship and a Captains berth aft finish off the cabins appointments.

Headroom in the cabin runs at about 6' at its tallest.

In the cockpit, the Fore or Aft facing companion seat had been removed, but it comes with the boat if the new owner would like to have it re-installed. This allows for ample amount of cockpit room for all the fishermen in the family.

The amount of teak on this Sea Ray is wonderful. It's all in beautiful condition.
She looks great, runs strong and is ready to hit the water again.

Please submit any and ALL offers - your offer may be accepted! Submit your offer today!

At POP Yachts, we will always provide you with a TRUE representation of every vessel we market. We encourage all buyers to schedule a survey for an independent analysis. Any offer to purchase is ALWAYS subject to satisfactory survey results.

Take a look at ALL ***191 PICTURES*** of this vessel, AND A VIDEO, on our main website at POPYACHTS DOT COM. Thank you for visiting and we look forward to speaking with you!

Stock #44146

Specifications

Condition
The original owner had run electrical throughout the boat for different types of equipment. At one time the hold where the fuel tank resides held up to 10 batteries and a separate charging alternator. Most of the electrical has been removed, but there are still remnants. The hull is in fantastic condition. The teak is wonderful, the interior needs tlc and some upgrading as there is no liner in the Captains berth.
Navigational Equipment
- Engine Autosynchronizer - Fuel Gauge - Navigation Lights - Speedometer - Tachometer - Windshield Wipers
Mechanical
- Bilge Blower - Bow Pulpit - Holding Tanks - Trim Indicator - Trim Tabs
Electrical Systems
- 110v AC Outlets - Accessory Switches - Alternator - Battery - Gauges - Horn - Shore Power - Volt Meter
Accommodations
- Bimini Top - Dinette - Galley - Head - Pressurized Water System - Sink
Construction
- Bottom Paint - Gel Coat (Good) - Propeller (Stainless) - Light weight, durable, all--welded construction makes fishing boats easy to tow, easy to store, and a pleasure to fish. - Gel Coat - Radar Arch - Bottom Paint - Keel Type - Ballast (Approx 7,000 Lbs.) - Bottom Paint (New In 2008) - Cockpit Type (Center) - Keel Type (Fin) - Engine Cooling - Helm Console - Radar Arch - Binnacle W/compass - Cockpit Type (OPEN FISSHERMAN) - Control Type (YAMAHA) - Thru-hull Fittings - Gel Coat - Gel Coat (NICE) - Thru-hull Fittings - Bottom Paint - Tuna Tower - Propeller (ALUMINUM) - Anchor - Bow Scuff Plate - Continuously Welded Box Girder Construction Hard Top with Alaskan Bulkhead with Door Dual Handrails on Hard Top Six Full Length Lifting / Turning Strakes Slotted Chine Extrusions Weld-on Bow Cleat Weld-on Double Bow Eye Six Gunnel Cleats - Weld-on Aluminum Stern Eyes Heavy Duty Welded Aluminum Offshore Bow Rails Two Weld-on Transducer Brackets Sound Insulation Package - Ballast (Lead) - Bottom Paint (Last Haul Out Was Spring 2014) - Keel Type (Shoal) - Anchor - Engine Cooling - Gel Coat - Bottom Paint - Bow Pulpit - Engine Cooling - Flybridge - Helm Console - Propeller - Raised Helm Deck - Stern Pulpit - Stored Inside - Thru-hull Fittings - Toe Rail - Upper Helm Station - Vent System - Bottom Paint - Anchor (2) - Bottom Paint (New) - Cobia Tower (With Electronics And Controls) - Anchor (Danforth) - Propeller (18'x19' 3 Blade Bronze) - Bottom Paint (NEW !!!) - Bow Scuff Plate - Custom Exhaust - Varnish Coat - Stored Inside - Engine Cooling (Raw Water) - Power Engine Hatch - Propeller (SS) - Anchor - Bow Pulpit - Bottom Paint - Tower - Tuna Tower - Power Engine Hatch - Propeller - Cabin Heat - Gel Coat - Radar Arch - Gel Coat (High Quality Marine Grade Color Enhanced HD Gelcoats) - Fuel Tank And System (24 Gallon Fuel Tank (under Console) EPA Compliant Fuel System) - Graphics (Raised Chrome Crystal Cap Logos) - Trolling Motor Platform (Molded Trolling Motor Platform) - Drains (Recessed Floor Drains Allow All Water To Drain From Floor) - Foam Flotation (Virtually Unsinkable Foam Flotation) - Hull: 100% Hand Laid Hull Laminate Process Used Throughout, 45deg Anti Hang-up Bow, Key Slot Transom Design Brings Engine Weight Inward Allowing Shallower Holeshot - Hull: Large Rounded Tunnel for Efficient Water Draw to Raised Engine Position, Modified V Design for Comfort and Shallow Water Capabilities, Molded Reverse Angle Anti Spray Chines, Solid Fiberglass Rod Reinforced Chines, Sound Dampening Core Reinforced Sides - Cabin Heat - Gel Coat (Very Good) - Propeller (3-stainless) - Tee Top (Custom Designed And Powder Coated) - Thru-hull Fittings - Gel Coat - Bottom Paint (As Is) - Flybridge - Helm Console - Bottom (Wood With Bottom Paint) - Topsides (Very Good Condition) - Bottom Paint - Radar Mast - Thru-hull Fittings - Propeller (4 Blade Cyclone) - Binnacle W/compass - Bottom Paint - Cabin Heat - Bottom Paint (2012) - Gel Coat (Very Good) - Polling Platform - POWERPOLE (8 Ft) - Propeller (Stainless Steel) - Stored Inside (Always Stored In Garage When Not In Use) - Bottom Paint - Stored Inside - Transom Height: 27" - Propeller (Dual Prop) - Propeller - Stored Inside (Garage) - Gel Coat - Propeller (Duo Stainless) - Binnacle W/compass - Helm Console - Anchor - Gel Coat (Excellent/blue Special Order) - Cabin Heat - Flybridge - Cabin Table - Helm Console - Bottom Paint - Cabin Heat - Gel Coat - Bottom Paint - Gel Coat - Propeller (Stainless Steel) - Radar Arch - Radar Mast - Gel Coat - Tee Top - Bottom Paint - Binnacle W/compass - Cockpit Type - Gel Coat - Helm Console - Propeller - Propeller (Alum) - Gel Coat (Excellent Condition) - Cabin Heat - Cabin Heat - Engine Cooling - Gel Coat - Cockpit Type - Gel Coat - Propeller - Binnacle W/compass (Ritchie) - Gel Coat - Propeller (SS) - Thru-hull Fittings - Anchor - Gel Coat (Ver Good Condition) - Bottom Paint - Propeller (Stainless Steel) - Propeller (Bravo 1 Stainless Steel) - Bottom Paint - Cabin Heat - Power Engine Hatch - Radar Arch - Propeller (Stainless Steel) - Power Engine Hatch - Gel Coat - Propeller (Stainless) - Radar Arch - Engine Cooling (CLOSED-LOOP COOLING SYSTEM) - Stored Inside - Tower - Gel Coat - Propeller (Stainless Steel) - Tee Top - Propeller (Stainless) - Cabin Heat - Engine Cooling (Freshwater) - Radar Arch - Flybridge - Propeller - Bottom Paint - Bottom Paint - Gel Coat - Propeller (STAINLESS) - Anchor - Engine Cooling (Fresh Water Colled) - Gel Coat (Good Condition) - Propeller (Bronze) - Bottom Paint - Gel Coat - Propeller (SS) - Thru-hull Fittings - Propeller (Spare Included) - Transom Height: 27" - Anchor - Anchor - Bottom Paint - Cockpit Type (Cuddy) - Engine Cooling (Raw) - Gel Coat - Propeller (Aluminum) - Propeller - Anchor - Bottom Paint - Gel Coat (Excellent) - Engine Cooling (RWC) - Propeller (Stainless Steel) - Gel Coat (Blue/white) - Propeller (Duo-prop) - Stored Inside - Propeller - Stored Inside (Covered Storage) - Power Engine Hatch - Propeller (Duoprop) - Radar Arch - Bottom Paint - Propeller (14.5 X 17 Aluminum) - Transom Height: 27" - Wakeboard Tower - Crow's Nest W/ Ladder - Tee Top - Thru-hull Fittings - Gel Coat - Propeller - Thru-hull Fittings - Flybridge (2nd Station W/ Controls) - Stored Inside - Bottom Paint - Cabin Heat (Webasto 2010) - Cockpit Type (Aft) - Engine Cooling (FWC) - Keel Type (Full) - Propeller (Bronze) - Radar Mast (Folding) - Thru-hull Fittings - Upper Helm Station - Vent System - Cabin Heat - Helm Console - POWERPOLE - Propeller - Stored Inside (Covdered Storage) - Toe Rail - Transom Height: 27" - Vent System - Engine Cooling - Gel Coat - Propeller (SS) - Gel Coat - Gel Coat (Very Good Shape) - Propeller (Stainless) - Engine Cooling - Gel Coat - Propeller (SS) - Stored Inside (Temp Controlled) - Binnacle W/compass - Helm Console - Propeller - Radar Mast - Tower - Bottom Paint (New 2014) - Gel Coat - Wakeboard Tower - Anchor - Engine Cooling - Gel Coat - Propeller (4 Blade SS) - Gel Coat (Very Good) - Polling Platform - POWERPOLE (8 Ft. With Remote) - Propeller (Stainless) - Engine Cooling (RWC) - Gel Coat - Gel Coat (Refinished With Awlgrip Allcraft) - Bottom Paint (New July 2014) - Cockpit Type (Fiberglass) - Engine Cooling (Open) - Gel Coat (Like New) - Propeller (Brass) - Stored Inside (Heated Warehouse) - Wake Board Rack - Gel Coat - POWERPOLE - Anchor (2) - Anchor - Radar Arch - Anchor - Gel Coat - Helm Console - Lazarette /garage - Propeller - Radar Arch - Bottom Paint - Radar Mast - Binnacle W/compass - Gel Coat - Propeller (SS) - Tee Top - Bottom Paint - Radar Mast - Propeller (3 Blade Stainless) - Radar Arch - Engine Cooling (FRESH WATER CLOSED) - Bow Scuff Plate - Propeller - ~ 4 Blade Stainless Prop - Gel Coat - Tee Top - Propeller - Radar Arch - Gel Coat - Propeller (4 Blade) - Gel Coat - Propeller (Dual) - Anchor - Propeller - Bottom Paint - Gel Coat - Propeller (Alum) - Tee Top - Bottom Paint (New 2013) - Radar Arch (Aluminum) - Stored Under Covered Slip - Bottom Paint (Needs Paint) - Bottom Paint - Cabin Heat - Gel Coat (Shinny) - Propeller (SS Duo Prop) - Radar Arch - Stored Inside - Anchor - Bottom Paint - Cabin Heat - Cockpit Type (Express Cruiser) - Engine Cooling - Tower - Gel Coat - Ballast Bags (700 Pound) - COBIA Tower (Collapsable) - Anchor - Gel Coat - Cabin Heat - Gel Coat - Radar Arch - Thru-hull Fittings - Bottom Paint - Gel Coat - Anchor (2 Galv.) - Anchor (2) - Gel Coat - Bottom Paint - Bottom Paint - Cabin Heat - Engine Cooling - Propeller (Bronze) - Raised Helm Deck - Thru-hull Fittings - Anchor - Bottom Paint (Needs Bottom Job Now) - Flybridge - Propeller (Brass, One Needs To Be Trued.) - Bottom Paint (Salt Water Paint) - Cabin Heat - Propeller - Gel Coat - Toe Rail - Engine Cooling (RWC) - Gel Coat - Power Engine Hatch - Anchor - Engine Cooling (Fresh Water With Raw Water Heat Exchanger) - Gel Coat (Good) - Propeller - Binnacle W/compass - Bottom Paint - Flybridge - Gel Coat - Bottom Paint (Newly Painted) - Gel Coat (Good) - Propeller (Dual) - Toe Rail - Transom Height: 27" - Bottom Paint - Lazarette /garage - Binnacle W/compass - Bottom Paint - Bow Pulpit - Stored Inside - Gel Coat - Bottom Paint - Cabin Heat - Gel Coat - Radar Arch - Binnacle W/compass - Power Engine Hatch - Radar Arch - Raised Helm Deck - Bottom Paint - Thru-hull Fittings - Bottom Paint - Engine Cooling (Rwc) - Gel Coat - Propeller (2SS) - Radar Arch - Thru-hull Fittings - Bottom Paint - Engine Cooling (RWC) - Gel Coat - Radar Arch - Bottom Paint (New 2012) - Engine Cooling (Freshwater) - Propeller's (18x20) - Thru-hull Fittings - Binnacle W/compass - Radar Arch - Thru-hull Fittings - Transom Height: 27" - Bottom Paint - Rod Holders - Bottom Paint - Radar Mast - Engine Cooling (Raw Water) - Hard Top (Inc) - Anchor - Custom Exhaust (Captain's Choice) - Engine Cooling - Gel Coat - Hard Top - Propeller ((2) Nibral) - Thru-hull Fittings - Lazarette /garage - Raised Helm Deck (Molded Fiberglass, Adjustable Helmsman/companion Seat) - Raised Helm Deck Seating (Lounge Seats With Storage) - Gel Coat - Propeller - Propeller (Dual Counter Rotating) - Bottom Paint - Propeller - Gel Coat - Helm Console - Power Engine Hatch - Propeller - Thru-hull Fittings - Construction (Carvel Planking And Sawn Frame) - Bottom Paint - Anchor - Ballast (15 Gal) - Gel Coat (Mint Condition) - Hyd Cont Switch Blade - Gel Coat - Propeller - Gel Coat - Bow Scuff Plate - Gel Coat - Custom Exhaust (Indmar EXT Cat) - Propeller (Bronze) - Propeller - Radar Arch - Anchor - Helm Console - Control Type (Quicksilver 3000) - Helm Console - Anchor - Engine Cooling (Raw Water) - Propeller (Aluminum) - Tuna Tower - Bottom Paint - Flybridge - Gel Coat - Helm Console - Propeller (2) - Radar Arch - Engine Cooling (RWC) - Gel Coat - Propeller - Thru-hull Fittings - Radar Arch - Bottom Paint (2013) - Engine Cooling (Raw) - WATER SYSTEM Pressure Water System Shower Water Tank WASTE SYSTEMS Sump Pump - Overall Length 27'6"/8.38 M Overall Length w/ Opt. Extended Swim Platform 29'9"/9.07 M Beam 9'6"/2.90 M Draft - Stern Drive Down 41"/104.1 CM Draft - Stern Drive Up 26"/66 CM Draft - Twin Stern Drive Down 38"/96.5 CM Draft - Twin Stern Drive Up 27"/68.6 CM - Dry Weight 6,400 LBS/2,903 KG Fuel Capacity 127 GAL/480.7 L Water Capacity 24 GAL/90.8 L Deadrise 21deg/21deg - Bottom Paint - Lazarette /garage - Transom Height: 27" - Anchor - Gel Coat - Propeller (STAINLESS STEEL) - Thru-hull Fittings - Engine Cooling (Freshwater) - Radar Arch - Bottom Paint - Anchor - Gel Coat - Helm Console - Propeller (Stainless) - Gel Coat - Propeller (Stainless Steel) - Bottom Paint - Engine Cooling (Fwc) - Gel Coat - Helm Console - Propeller (2) - Thru-hull Fittings
Deck Gear
- Bimini - Ski Toe Eyes - Swim Ladder - Swim Platform
Safety Equipment
- Bilge Pump