Click here to check out the new BoatQuest website. New design, mobile and more! ➥

Related Searches

2001 26 (ft.) Chaparral Boats 260 SSI

Save This Ad

General Information

Listing# 140567

Price
$36,955.00
Location
Danbury, CT, United States
Manufacturer
Chaparral
Boat Type
Powerboat
Model Year
2001
Category
Bowrider
Model
260 SSI
Status
Used
Length
26 (ft.)
Beam
102
LOA
312
Hull Material
Fiberglass

General Details

You can own this vessel for as little as $357 per month. Fill our the contact form to learn more!

She's built on a solid fiberglass deep-V hull with an aggressive
22 degrees of transom deadrise, enough to smooth out some
fairly rough water

Please submit any and ALL offers - your offer may be accepted! Submit your offer today!

At POP Yachts, we will always provide you with a TRUE representation of every vessel we market. We encourage all buyers to schedule a survey for an independent analysis. Any offer to purchase is ALWAYS subject to satisfactory survey results.Contact us for a free BoatHistoryReport.com report on this vessel. We pay upfront for a report on every vessel possible, and we provide this peace of mind to our buyers at no charge and with no commitment. All you have to do is ask!

Take a look at ALL ***ORIGINAL PICTURES*** of this vessel on our main website at POPYACHTS DOT COM. Thank you for visiting and we look forward to speaking with you!

Stock #44712

Specifications

Condition
125 original hours and a one owner boat Hull colors are white with black and yellow accents This is a must see boat!!
Navigational Equipment
- Cockpit Tables - Compass - Fuel Gauge - Navigation Lights - Speedometer - Tachometer
Mechanical
- Cockpit Type (Bow Rider) - Engine Cylinders (V-8) - Engine Location - Fiberglass Stringers - Hand Rails
Electrical Systems
- 12 V DC Outlets - ABYC Color Coded Wiring - Accessory Switches - Battery - Engine Kill Switch - Gauges - Horn - Night Lighting - Speakers - Stereo - Volt Meter
Accommodations
- Head (In Change Compartment) - Sink - Table
Construction
- Engine Cooling (Raw) - Propeller - Tee Top - Thru-hull Fittings - Bottom Paint - Anchor - Bottom Paint - Engine Cooling (FWC) - Bottom Paint - Bottom Paint (Needs New) - Gel Coat - Propeller (S/S X2) - Radar Arch - Engine Room Heater (Factory Installed) - Anchor - Bottom Paint - Tower - Bottom Paint - Hard Top - Anchor - Hard Top - Propeller (STAINLESS STEEL) - Thru-hull Fittings - Toe Rail - Tee Top - Tower - Fiberglass Engine Cover - Handlaid Fiberglass - Bottom Paint (No Bottom Paint, Never In The Water Overnight) - Heavy-duty Marine-grade V (Vinyls: Expanded Back 29 Oz. /linear Yard & 45 Gauge ) - SRS(TM) Hull Design - Unitized Construction (W/glassed-in Bulkheads) - Hull (Vinylester Skin Coat) - XL Composite Panels - Bottom Paint - Gel Coat - Bottom Paint - Engine Cooling (Fresh Water) - Keel Type (Full) - Bottom Paint - Propeller (Stainless) - Gel Coat - Propeller (2) - Gel Coat - Engine Cooling - Gel Coat - Helm Console - Propeller (1 Spare (stainless)) - Gel Coat (GOOD) - Thru-hull Fittings - Anchor (1) - Control Type (Rigged For Single Handed) - Cockpit Type (Open) - Propeller - Thru-hull Fittings - Keel Type (Fin W/spade Rudder) - Masthead Sloop - Wakeboard Tower - Thru-hull Fittings - Anchor - Gel Coat (GOOD) - Hard Top - Thru-hull Fittings - Bottom Paint - Radar Mast - ~ Quiet Flush Fresh Water Head added ~ Macerator added to flush waste from under the boat instead of out the side ~ Bottom Painted in early 2013 - Gel Coat - Wakeboard Tower (Fold Down With Speakers) - Tee Top - Binnacle W/compass - Bottom Paint - Engine Cooling - Gel Coat - Helm Console - Propeller (1 Spare) - Thru-hull Fittings - Thru-hull Fittings - Anchor - Engine Cooling - Gel Coat - Thru-hull Fittings - Bottom Paint - Propeller (Twin) - Bottom Paint - Flybridge - Helm Console - Lazarette /garage (2 Transome) - Propeller (2 NEW Brass) - Radar Arch - Gel Coat (Good) - Stored Inside - Gel Coat (Beautiful) - Power Engine Hatch - Propeller - Power Engine Hatch - Anchor - Bottom Paint - Engine Cooling (RWC) - Gel Coat - Helm Console - Power Engine Hatch - Bottom Paint - Flybridge - Bottom Paint (New Oct. 2013) - Lazarette /garage - Gel Coat (NICE) - Stored Inside (HEATED CLIMATE CONTROLLED) - Wakeboard Tower - Propeller - Anchor (Yes) - Gel Coat - Gel Coat (GOOD) - Propeller (STAINLESS STEEL) - Thru-hull Fittings - "Pocket cruisers are becoming more and more popular, and for good reason. These full featured vessels give small families greater overnight comfort while offering the ability to expand their horizons with the boats tow ability. - With this in mind, Bayliner's 265 hits the docks with spaciousness, many standard features and best of all, at a value-filled retail price - She also delivers contemporary styling and futuristic side windows that allow significant ambient light into the cabin, making for an interior that feels larger than it actually is. Bayliner's 265 hits the docks with spaciousness, many standard features and best of all, at a value-filled price." - Bottom Paint - Anchor - Custom Exhaust (Captain's Choice) - Engine Cooling - Gel Coat - Hard Top - Propeller ((2) Nibral) - Thru-hull Fittings - Lazarette /garage - Raised Helm Deck (Molded Fiberglass, Adjustable Helmsman/companion Seat) - Raised Helm Deck Seating (Lounge Seats With Storage) - Gel Coat - Helm Console - Propeller - Anchor - Gel Coat - Propeller - Stored Inside - Tee Top - Thru-hull Fittings - Gel Coat - Propeller (Two Counter Rotating) - Anchor - Propeller (STAINLESS STEEL) - Construction (Carvel Planking And Sawn Frame) - Anchor - Bottom Paint (No) - Gel Coat (Upgraded Pearl With Blue Accents) - Gel Coat - Propeller - Gel Coat - Helm Console - Bottom Paint - Control Type (Open) - Gel Coat - Propeller - Radar Arch - Thru-hull Fittings - Control Type - Bottom Paint - Engine Cooling (RWC) - Gel Coat (Excellent) - Propeller (Stainless) - Bottom Paint - Engine Cooling (Raw Water) - Anchor - Stored Inside (Indoor Storage Facility) - Stored Under Cover (Shed) - Anchor - Bottom Paint - Propeller - Gel Coat (Good Condition) - Gel Coat (GOOD) - Anchor - Gel Coat - Anchor - Hard Top - Gel Coat - Stored Inside - Binnacle W/compass - Gel Coat (Good Condition) - Helm Console - Tee Top - Anchor - Propeller (Dual Prop) - Anchor - Cockpit Type (Deck) - Bottom Paint - Tee Top - Bow Scuff Plate - Custom Exhaust - Varnish Coat - Stored Inside - Bottom Paint - Bottom Paint - Helm Console - Keel Type (Retractable) - Propeller - Anchor - Propeller - Thru-hull Fittings - Bottom Paint - Engine Cooling (Freshwater) - Hard Top - Bottom Paint - Engine Cooling (Raw Water) - Tee Top - Thru-hull Fittings - Ballast (7300 Lbs) - Cockpit Location (Aft) - Keel Type (Modified) - Flybridge - Keel Type (Under Body Is A Hard Chine Design With Moderate Dead Rise And A Small Keel) - Propeller (Stainless Steel) - Lazarette /garage - Gel Coat - Bottom Paint - Polling Platform - Ballast (3 Tanks) - Gel Coat - Propeller - Stored Inside - Transom Height: 27" - Anchor - Bottom Paint (New 2014) - Bottom Paint (Needs Touch Up) - Hard Top - Engine Cooling (Closed) - Helm Console - Propeller (Two New) - Anchor - Propeller (Ss) - Radar Arch - Stored Inside - Wakeboard Tower - Bottom Paint (Approx. 2 Years Old. Cleaned Regularily) - NOTE: While there is not a lot of information on these Boats, owners research indicates they were built (Cold moulded) in Honduras using Hondurian mahogany then glassed over. When cured they were shipped to Ajax ( near Seattle) for fit out. If anyone has more information please contact Paul (805)2 - Helm Console - Gel Coat (Good) - Bottom Paint - Radar Arch - Gel Coat (Fair) - Bottom Paint (Petit Vivid Red) - Cobia Tower - Tee Top - Tower - Gel Coat - Power Engine Hatch - Gel Coat (Excellent Condition) - Radar Arch - Transom Door - Radar Arch - Bottom Paint (New 2013) - Bottom Paint - Gel Coat - Power Engine Hatch - Gel Coat (GOOD) - Thru-hull Fittings - Bottom Paint - Gel Coat - Anchor - Bottom Paint - Propeller - Stored outside with Center Console and engine cover on a lift. Lifted up out of the water the whole time. All updated engine work every year. - Cobia Tower (No Tower But Has Ladder And Pegs For Future Tower) - Wood (Recently Finished) - Bottom Paint - Gel Coat - Propeller - Bottom Paint - Gel Coat - Helm Console - Power Engine Hatch - Propeller - Vent System - Anchor - Tuna Tower (Fold Down) - Engine Cooling - Gel Coat - Propeller (Aluminum) - Anchor - Engine Cooling - Propeller - Tower - Gel Coat - Radar Mast - Gel Coat - Bottom Paint - Engine Cooling - Gel Coat (Imron) - Helm Console - Propeller (2 Bronze) - Tower - Gel Coat - Helm Console - Polling Platform - POWERPOLE - Anchor (Yes ( Pictured )) - Propeller (Stainless Steel) - Tower (Yes) - Bottom Paint - Gel Coat - Gel Coat (Good) - Bottom Paint - Custom Exhaust - Gel Coat - Bottom Paint - Gel Coat - Propeller (Dual S/S) - Bottom Paint (⦁ bottom Repainted May 2010-cleaned Every 4 Weeks) - Engine Cooling (Freshwater) - Propeller - Bottom Paint - Gel Coat - Anchor - Propeller (STAINLESS STEEL) - Thru-hull Fittings - Control Type (Quicksilver 3000) - Helm Console - Bottom Paint - Gel Coat - Propeller - Ballast (Approx 7,000 Lbs.) - Bottom Paint (New In 2008) - Cockpit Type (Center) - Keel Type (Fin) - Anchor - Engine Cooling (Raw Water) - Propeller (Aluminum) - Gel Coat (GOOD) - Propeller (4 BLADE) - Radar Arch - Anchor - Engine Cooling (RWC) - Gel Coat - Helm Console - Radar Arch (Fiberglass) - Bottom Paint - Crow's Nest W/ Ladder - Propeller (Stainless) - Tee Top - Bottom Paint - Propeller (Stainless Steel) - Gel Coat (GOOD) - Gel Coat - Stored Inside (Always!) - Engine Cooling (RWC) - Helm Console - Bottom Paint (New) - Propeller - Tee Top - Bottom Paint (Redone 2013) - Gel Coat - Radar Arch - Engine Cooling (Open) - Gel Coat (Gleams!) - Stored Inside (In Winter) - Engine Cooling (Closed System) - Gel Coat - Bottom Paint - Thru-hull Fittings - Gel Coat - Cockpit Type (Self Bailing) - Propeller (3 Blade) - Radar Arch - Bottom Paint - Radar Arch - Cockpit (8' X 7') - Anchor - Bottom Paint (2012) - Anchor - Helm Console - Tee Top - Bow Pulpit - Gel Coat (GOOD) - Propeller (DUAL) - Thru-hull Fittings - Tuna Tower - Ballast (2680 Lbs.) - Bottom Paint (Last On 12/2012) - Anchor - Gel Coat - Bottom Paint (Awlgrip) - Anchor - Helm Console - Bottom Paint - Flybridge - Gel Coat - Helm Console - Propeller (2) - Radar Arch - Bottom Paint - Engine Cooling (RWC) - Gel Coat - Propeller - Thru-hull Fittings - Bottom Paint - Engine Cooling - Propeller (W/ Spares) - Radar Arch - Thru-hull Fittings - Radar Arch - Bottom Paint (2013) - Engine Cooling (Raw) - Engine Cooling - Propeller - Gel Coat - Propeller - Stored Inside - Bottom Paint - Keel Type (Daggerboard) - Propeller (1 Spare) - New Transom - Engine Cooling (Fresh Water) - Radar Arch - Propeller (Stainless Steel 3 Blade) - Radar Arch (With Custom Light Mounted Under) - Anchor - Bottom Paint - Hard Top - Engine Cooling (Raw Water) - Gel Coat - Thru-hull Fittings - Engine Cooling (Freshwater) - Bottom Paint - Bottom Paint - Gel Coat - Propeller (Alum) - Bottom Paint - Propeller (2) - Bottom Paint - Gel Coat - Propeller (SS Duoprop) - Anchor - Engine Cooling (Fresh Water Cooled) - Radar Arch - Bottom Paint - Gel Coat - Bottom Paint (Bottom Was Soda-blasted And Sanded To Bare Fiberglass Professionally Coated With 6 Layers Of Paint.) - Cockpit Type (Cockpit Sole Is Custom Built Teak Floor Boards.) - Engine Cooling (F/W Cooled) - Toe Rail (Toe Rail And Cockpit Seats/backs Are Varnished Teak.) - Bottom Paint - Gel Coat - Thru-hull Fittings - Flybridge - Propeller - Compression Post (New Stainless Steel) - Deck Paint (New!) - Hull Paint (New!) - Bottom Paint (New!) - Seacocks (New Marelon) - Toe Rail (New) - Ballast (3800 Lbs Lead) - New Bottom Paint Feb. 2013 - Custom Tower (Made So It Can Be Taken Down Without Cutting It Down. Removable.) - Bottom Paint - Gel Coat (Very Good) - Helm Console - Propeller (2 Bronze) - Radar Mast - Bottom Paint - Engine Cooling (Fresh Water) - Radar Arch - Anchor - Engine Cooling - Propeller (Stainless) - Gel Coat - Propeller (2) - Gel Coat - Engine Cooling (Raw Water) - Propeller - Gel Coat (Very Good Condition) - Engine Cooling (Raw Water) - Gel Coat (Poor) - Helm Console - Keel Type (Steel) - Engine Cooling (Freshwater) - Propeller - Polling Platform - Stored Inside (Under Carport) - Limited Lifetime Warranty ((hull, Stringers & Transom)) - Custom Molded Fiberglass (Hull, Stringers, & Transom) - HAMBYS HULL PROTECTOR - Flybridge - Bottom Paint (Emron) - Bottom Paint - Engine Cooling (Raw) - Propeller (Ss) - Engine Cooling (RWC) - Gel Coat - Helm Console - Propeller (4 Blade Nibral) - Stored Inside - Propeller (Stainless) - Anchor - Bottom Paint - Cabin Heat - Propeller (2 Spare Props) - Radar Arch - Thru-hull Fittings - Bottom Paint - Engine Cooling (FWC) - Helm Console - Propeller (BRONZE) - Bottom Paint - Gel Coat - Propeller - Thru-hull Fittings - Bottom Paint - Engine Cooling (Fresh Water) - Engine Cooling - Gel Coat - Bottom Paint - Bottom Paint - Anchor - Engine Cooling - Keel Type - Propeller (2) - Radar Arch - Gel Coat (Very Good) - Power Engine Hatch - Engine Cooling (FRESH Water Heat Exchanger) - Gel Coat (Very Good Condition) - Helm Console - Propeller (SS Viper) - Gel Coat - Propeller (Duo Stainless) - Anchor - Gel Coat - Propeller (STAINLESS STEEL) - Thru-hull Fittings - Engine Cooling (Freshwater) - Radar Arch - Bottom Paint - Anchor - Gel Coat
Deck Gear
- Beverage Holders - Cockpit Faucet - Cockpit Lighting - Cockpit Seating - Cockpit Sink (Wet Bar) - Cockpit Table - Cockpit Wet Bar - Courtesy Lights - Fenders - The cockpit design of the 260 SSi-wraparound lounge seating aft, swivel helm and companion seats, wet bar with sink and ice chest, - A transom shower, bow ice chest, in-floor storage, and removable cocktail table were standard;
Safety Equipment
- Bilge Pump - Bright Cockpit Lighting - Fire Extinguisher - First Aid Kit - Flare Kit - Grab Rail