Click here to check out the new BoatQuest website. New design, mobile and more! ➥

Related Searches

2002 19 (ft.) Jones Brothers 1910 Lite Tackle

Save This Ad

General Information

Listing# 144640

Price
$26,600.00
Location
Westport, CT, United States
Manufacturer
Jones Brothers
Boat Type
Powerboat
Model Year
2002
Category
Center Consoles
Model
1910 Lite Tackle
Status
Used
Length
19 (ft.)
Beam
90
LOA
228
Hull Material
Fiberglass
Fuel Type
unleaded
Engine Model
150
Number of Engines
1
Engine Type
Other
Engine Hours
350

General Details

We believe the Cape Fisherman 1910LT is the finest big-water lite-tackle fishing boat available today. The 1910LT offers enough beam and freeboard for rough waters and inlets, and has the driest ride you will find in a boat this size. Super-clean decks with pop-up cleats and bow lite keep fly lines from snagging. You will also find the most useful storage compartments for any boat its size. Custom designed rod racks and tubes protect your fly rods and conventional tackle. The 1910 LT has a low profile console/windshield, two watertight compartments, and grab rails that are the perfect height whether standing or sitting.

In the bow, non-skid casting platforms are truly fly friendly and at the stern you will find one of the most innovative features on any boat in America today. Between a large dry storage area on the starboard side and an oval livewell on the port there is an ingenious bridge that serves as both the stern casting platform and as a seat for the captain and passengers. When not needed, the bridge can be folded over, giving the same walkthrough characteristics as a center console. The folded-over bridge is faced with a large cutting board.

Perhaps the most significant aspect of the bridge platform is that it allows water to go through the boat and out over the stern quickly. While most lite tackle boats with a large enclosed area tend to trap water, the Cape Fisherman LT provides superior fore and aft casting platforms with the ability to drain quickly and completely.

The Cape Fisherman 1910LT features standard Lenco trim tabs for balancing loads and navigating shallow water as well as hydraulic steering for ease of handling in heavy seas. Fuel capacity is 57 gallons and gives the boat phenomenal range.

This boat was designed for fisherman by fisherman. We believe there is no better boat in its size class for the fly fisherman or lite tackle angler. Safe, seaworthy, angler/fly line friendly... The Jones Brothers 1910 LT has it all.

Please submit any and ALL offers - your offer may be accepted! Submit your offer today!

At POP Yachts, we will always provide you with a TRUE representation of every vessel we market. We encourage all buyers to schedule a survey for an independent analysis. Any offer to purchase is ALWAYS subject to satisfactory survey results.Contact us for a free BoatHistoryReport.com report on this vessel. We pay upfront for a report on every vessel possible, and we provide this peace of mind to our buyers at no charge and with no commitment. All you have to do is ask!

Take a look at ALL ***ORIGINAL PICTURES*** of this vessel on our main website at POPYACHTS DOT COM. Thank you for visiting and we look forward to speaking with you!

Stock #47631

Specifications

Condition
57 Gallon Fuel Tank Lenco Electic Trim Tabs Battery Tray and Wiring Harness to Console Navigation Lights with Pop-Up Bow Light Six Gang Booted Switch Panel Ten Gang Fuse Block Cockpit Lights Console Super Fish Console Super Fish Windshield SeaStar Hydraulic Steering Stainless Steel Steering Wheel Stainless Steel Console Grab Rail Ritchie Compass Console Rod Rack Console Tackle Locker Insulated Cooler Under Forward Console Seat Console Sliding Door 12 Volt Accessory Outlet Fishing Features Four Stainless Steel Rod Holders Rod Tip Tubes Fore and Aft Under Gunwale Poly Rod Racks Hull, Deck & Cockpit 100% Composite Construction Fiber Glass Stringer Grid Self Bailing Cockpit Automatic Bilge Pump Casting Platform/Fish Box (Bow) Flush Anchor Locker Foam Flotation Four 12" Stainless Hand Rails Heavy Duty Rub Rail/SS Insert In Floor Storage Under Forward Casting Platform Non-Skid Gunwales and Cockpit Rear Casting Platform with Center Folding Bridge and Cutting Board, Livewell (Port Rear Platform), and Storage (Starboard Rear Platform) Rigging Conduit Beneath the Floor Stainless Steel Fuel Fill Three Pull-Up Cleats - 2002 Yamaha 150 HPDI (2 stroke) - Approx 350Hrs ( I can check exact hrs ) - 25 inch shaft - Runs perfectly - Maintenance done by All Season Marine in Westport CT - Master Yamaha Mechanic. - Boat runs at 39 MPH (3/4 tank of gas - stuff - 2 people)
Navigational Equipment
- Fuel Gauge - Tachometer - VHF
Mechanical
- Engine Location (V-6) - Fuel Tank (57) - Passenger Capacity (7) - Propulsion (O/B) - Super Fish Console Super Fish Windshield SeaStar Hydraulic Steering Stainless Steel Steering Wheel Stainless Steel Console Grab Rail Ritchie Compass Console Rod Rack Console Tackle Locker Insulated Cooler Under Forward Console Seat Console Sliding Door 12 Volt Accessory Outlet
Electrical Systems
- 57 Gallon Fuel Tank Lenco Electic Trim Tabs Battery Tray and Wiring Harness to Console Navigation Lights with Pop-Up Bow Light Six Gang Booted Switch Panel Ten Gang Fuse Block Cockpit Lights - Battery - Battery Location - Docking Lights - Engine Kill Switch - Fuse Panel - Gauges
Construction
- Tee Top - Bottom Paint - Engine Cooling (Fresh Water) - Gel Coat - Propeller - Stored Inside (Covered Storage) - Transom Height: 27" - Thru-hull Fittings - Engine Cooling (Raw Water Cooled) - Gel Coat (Black In Nice Condition) - Propeller (Stainless Duoprop) - Anchor (2) - Gel Coat - Binnacle W/compass - Cockpit Type - Gel Coat - Helm Console - Propeller - Bottom Paint - Anchor (2) - Gel Coat - Tee Top - Propeller (Bravo III) - Radar Arch - Helm Console - Gel Coat - Bottom Paint - Bottom Paint - Gel Coat - Gel Coat - POWERPOLE (8 Foot) - Tee Top - Gel Coat - Polling Platform - Propeller (Stainless) - Crow's Nest W/ Ladder - Tee Top - Anchor - Gel Coat - Power Engine Hatch - Propeller (Dual Stainless Steel W/26 Pitch) - Stored Inside - Gel Coat - Propeller - Thru-hull Fittings - Gel Coat - Propeller (Stainless) - Tee Top - Anchor - Bow Pulpit - Cabin Heat - Radar Mast - Gel Coat - Propeller (SS) - Skeg Guard (SS) - Toe Rail - Tiller - Flybridge - Helm Console - Tower - Tower Light - All info was provided by the owner - Bottom Paint (May 2014) - Keel Type (Winged) - Tee Top - Flybridge (2nd Station W/ Controls) - Bottom Paint (Last Was 2012) - Bow Pulpit - Cockpit Type (Bowrider) - Helm Console - Propeller - Engine Cooling (Raw Water) - Gel Coat - Propeller (SS) - Bottom Paint - ~ Bottom Painted June 2014 - Propeller (Bronze) - Bottom Paint - Cabin Heat - Engine Cooling (Raw Water Cooled) - Power Engine Hatch - Propeller (Volvo-penta Duoprop) - Radar Arch - Raised Helm Deck - Ballast (8,000 Lbs) - Keel Type (Full) - Power Engine Hatch - Propeller (Duoprop) - Radar Arch - Bottom Paint - Bottom Paint - Hard Top - Gel Coat (Blue/white) - Propeller (Duo-prop) - Stored Inside - Hard Top - Bottom Paint - Bow Pulpit - Engine Cooling - Gel Coat - Helm Console - Propeller (2 Aluminum) - Radar Arch - Stored Inside (Boat House) - Thru-hull Fittings - Bottom Paint - Bow Pulpit - Engine Cooling - Gel Coat - Helm Console - Propeller (2 Aluminum) - Radar Arch - Stored Inside (Boat House) - Thru-hull Fittings - Engine Cooling - Gel Coat - Thru-hull Fittings - Building a better boat every day is the mantra of the Viking Yacht Company. - Viking prides itself on its renowned manufacturing capabilities. From the initial design to the finished product, Viking's highly-regarded reputation is rooted in the company's commitment to produce 90 percent of the boat in house. - Except for components such as engines, transmissions, pumps, hoses, air conditioning units, electronics and entertainment systems, virtually everything else is produced in house by our talented workforce. - Polling Platform - Wake Board Rack - Propeller - Engine Cooling - Gel Coat - Propeller (S/steel) - Stored Inside - Engine Cooling (FRESH WATER CLOSED) - Radar Arch - Binnacle W/compass - Cabin Heat - Control Type - Engine Cooling - Gel Coat - Hard Top - Radar Arch - Lazarette /garage (2 Transom) - Ballast (1,450 Lb Factory System) - Tower - Polling Platform - Propeller - Engine Cooling - Gel Coat - Propeller (4 Blade SS) - Binnacle W/compass - Helm Console - Propeller - Radar Mast - Tower - Propeller (Duoprop) - Cockpit Type (Self Bailing) - Anchor - Gel Coat - Gel Coat - Propeller (Stainless Steel) - Bottom Paint - Engine Cooling (Integrated) - Gel Coat - Helm Console - Power Engine Hatch - Propeller - Thru-hull Fittings - Bottom Paint - Cabin Heat - Propeller (Duo-prop) - Underwater Exhaust - Power Engine Hatch - Thru-hull Fittings - Vent System - Anchor Chute w/Hawse Pipe - Concealed w/Hatch Bow & Stern Eyes, Stainless Steel Bow Rail, Stainless Steel w/Welded Stanchions Cleats, Custom Sea Ray(c) 10" ThruBolted - Stainless Steel (8) Deck Fill Plates, Stainless Steel Drain Plugs, Brass-Threaded - Garboard (2) Gel Coat, Arctic White Gr - Hatch, Deck Vent - Translucent w/Locks & Sky Screen Cover Hull Windows, Opening w/Screens Lights, Navigation - Stainless Steel Resin, High-Performance Vinylester Rub Rail, PVC w/Stainless-Steel Insert Seating, Foldaway, Aft-Facing -Transom Skylights (2) Storage, Transom Wall - Swim Platform, Integral/Extended w/Concealed Stainless-Steel FourStep Swim Ladder Thru-Hull Fittings, Stainless Steel Vent System, Engine Room - Integral Windshield, Tempered/Tinted Curved Glass w/Walk-Thru & StainlessSteel Supports Windshield Wipers - Anchor Chute w/Hawse Pipe - Concealed w/Hatch Bow & Stern Eyes, Stainless Steel Bow Rail, Stainless Steel w/Welded Stanchions Cleats, Custom Sea Ray(c) 10" ThruBolted - Stainless Steel (8) Deck Fill Plates, Stainless Steel Drain Plugs, Brass-Threaded - Garboard (2) Gel Coat, Arctic White Gr - Hatch, Deck Vent - Translucent w/Locks & Sky Screen Cover Hull Windows, Opening w/Screens Lights, Navigation - Stainless Steel Resin, High-Performance Vinylester Rub Rail, PVC w/Stainless-Steel Insert Seating, Foldaway, Aft-Facing -Transom Skylights (2) Storage, Transom Wall - Swim Platform, Integral/Extended w/Concealed Stainless-Steel FourStep Swim Ladder Thru-Hull Fittings, Stainless Steel Vent System, Engine Room - Integral Windshield, Tempered/Tinted Curved Glass w/Walk-Thru & StainlessSteel Supports Windshield Wipers - Propeller - Bottom Paint - Cabin Heat - Engine Cooling (Fresh Water Cooled) - Gel Coat (Excelent Condition) - Propeller (Bronze) - Thru-hull Fittings (Bronze) - Tower - Gel Coat - Propeller (Stainless Steel) - Tee Top - Cabin Heat - Engine Cooling (Freshwater) - Radar Arch - Propeller - Custom Exhaust - Engine Cooling (Freshwater) - Propeller - Wrapping - Propeller (Aluminum) - Bottom Paint - Gel Coat - Propeller (STAINLESS) - Crow's Nest W/ Ladder - Flybridge - Gel Coat (Good) - Anchor - Anchor - Engine Cooling (Fresh Water Colled) - Gel Coat (Good Condition) - Propeller (Bronze) - Bottom Paint - Propeller (Nibral) - Tower - Tuna Tower - Spare Props - Anchor - Bottom Paint - Cockpit Type (Cuddy) - Engine Cooling (Raw) - Gel Coat - Propeller (Aluminum) - Propeller - Binnacle W/compass - Bottom Paint - Cockpit Type - Gel Coat - Propeller - Radar Arch - Ballast (Encased Lead, 8,500 #) - Bottom Paint (2013) - Keel Type (Long Fin) - Propeller (Folding, GORI 23'dx13'p Custom) - Propeller - Stored Inside (Covered Storage) - Power Engine Hatch - TRAILER FEATURES: - No Touch Vortex hub lubrication system - Spare tire carrier (spare tire optional) - Color-coordinated, single-axle drive-on NITRO trailer - All-welded tubular frame for a unitized structure w/an exceptional strength-to-weight ratio - - Powder-coated welded steel tubing w/GALVASHIELD II corrosion protection - 14" (35.56 cm) wheels w/radial tires & chrome center caps - Heavy-duty winch w/safety strap - Folding tongue jack w/swivel wheel - Retractable safety cables - Space-saving swing-away tongue - - Carpeted bunks - Submersible lights - Tie downs - Transom saver - Retractable safety cables - Anchor - Thru-hull Fittings - Bottom Paint - Bottom Paint - Tee Top - Lazarette /garage - Bottom Paint - Propeller - Wake Board Rack - Stored Inside - Bottom Paint - Tee Top - Cabin Heat - Engine Cooling (Raw Water) - Propeller (Alum) - Gel Coat - Hard Top - Helm Console - Tee Top - Gel Coat - Stored Inside - Wakeboard Tower (Joystick Wake Tower) - Gel Coat - Propeller (SS) - Gel Coat - Gel Coat - Gel Coat (Very Good Shape) - Propeller (Stainless) - Bottom Paint - Engine Cooling (Open) - Gel Coat - Propeller (Dual Stainless Steel) - Gel Coat (Good Painted With Valspar) - Propeller (Stainless) - Cabin Heat - Bottom Paint (New) - Cobia Tower (With Electronics And Controls) - Bottom Paint - Ballast (Internal) - Bottom Paint - Bow Pulpit - Cabin Heat - Cockpit Type (Center) - Engine Cooling (Closed Loop) - Gel Coat - Thru-hull Fittings (New) - Anchor - Gel Coat - Propeller (Aluminum) - Tee Top - Bottom Paint - Bottom Paint (Barrier Coated / Multi-year Pettit Bottom Paint - 2013) - Radar Arch - Raised Helm Deck - Gel Coat - Propeller (Duo Stainless) - Gel Coat (Excellent) - Anchor - Gel Coat - Stored Inside - Bottom Paint - Gel Coat - Propeller - Gel Coat - Propeller (Stainless) - Anchor - Bottom Paint - Gel Coat (Blk/white) - Propeller (Stainless) - Stored Inside (Dry Stacked) - Tee Top (Blk. Sumbrella) - Gel Coat (High Quality Marine Grade Color Enhanced HD Gelcoats) - Fuel Tank And System (24 Gallon Fuel Tank (under Console) EPA Compliant Fuel System) - Graphics (Raised Chrome Crystal Cap Logos) - Trolling Motor Platform (Molded Trolling Motor Platform) - Drains (Recessed Floor Drains Allow All Water To Drain From Floor) - Foam Flotation (Virtually Unsinkable Foam Flotation) - Hull: 100% Hand Laid Hull Laminate Process Used Throughout, 45deg Anti Hang-up Bow, Key Slot Transom Design Brings Engine Weight Inward Allowing Shallower Holeshot - Hull: Large Rounded Tunnel for Efficient Water Draw to Raised Engine Position, Modified V Design for Comfort and Shallow Water Capabilities, Molded Reverse Angle Anti Spray Chines, Solid Fiberglass Rod Reinforced Chines, Sound Dampening Core Reinforced Sides - Propeller (Aluminum) - Stored Inside (CAR PORT) - Bottom Paint - Propeller (Alu) - Hard Top - Propeller (Stainless Steel) - Flybridge - Gel Coat - Wakeboard Tower - Anchor - Engine Cooling (RWC) - Gel Coat - Gel Coat (Refinished With Awlgrip Allcraft) - Bottom Paint (New July 2014) - Cabin Heat - Gel Coat - Bottom Paint (No) - Gel Coat - Helm Console - Propeller (3-blade Mercury Enertia Stainless Steel Prop) - Tee Top - Thru-hull Fittings - Bottom Paint - Engine Cooling - Propeller (Ss) - Thru-hull Fittings - Gel Coat - Stored Inside (Garage Kept) - Anchor - Cabin Heat - Gel Coat (Good Shape) - Radar Arch - Cabin Heat - Radar Arch - Bottom Paint (New In 2012) - Hard Top - Bottom Paint (VC17 Over Interlux 2000 Base) - Cabin Heat - Engine Cooling (Raw) - Gel Coat (Mint) - Helm Console - Power Engine Hatch - Propeller (Brass) - Radar Arch - Stored Inside - Thru-hull Fittings - Gel Coat (Good) - Bottom Paint - Gel Coat - Anchor - Bottom Paint - Propeller - Engine Cooling - Gel Coat - Power Engine Hatch - Propeller (2) - Flybridge (Dual Helm) - Helm Console (Dual Helm) - Radar Arch - Bottom Paint (NEW) - Gel Coat - Anchor - Bottom Paint - Cabin Heat - Gel Coat - Propeller (Bravo III) - Anchor (2) - Wake Board Rack - Wakeboard Tower - ~ Full Kevlar Hull - Anchor - Cabin Heat - Gel Coat - Helm Console - Anchor - Cabin Heat - Propeller - Binnacle W/compass - ~ Aluminum Hull w/ Welded Seams ~ Integrated Tongue-and-groove hull design with continuous welded seams ~ Lifetime Warranty on Hull - Tower - Bottom Paint - Gel Coat - Propeller (Duo Prop) - Anchor - Gel Coat - Helm Console - Propeller - Cabin Heat - Engine Cooling - Bottom Paint - Gel Coat - Propeller - Wake Board Rack - Tower Light - Propeller (4 BLADE) - Thru-hull Fittings - Ballast (3500 Lbs) - Binnacle W/compass - Bottom Paint - Bow Pulpit - Control Type (Wheel) - Keel Type (Fin) - Propeller (15" 2 Bladed Folding) - Binnacle W/compass - Bottom Paint - Ballast (2400 Lbs) - Gel Coat - Cobia Tower - Propeller - Bottom Paint (2013) - Engine Cooling (RAW WATER) - Bottom Paint - Bottom Paint - Engine Cooling - Gel Coat - Propeller (Aluminum) - Thru-hull Fittings - Bottom Paint - Propeller (Stainless) - Propeller (Stainless) - Bottom Paint - Cabin Heat (Defroster) - Engine Cooling (Closed) - Propeller (Bronze) - Cabin Heat - Gel Coat - Helm Console - Thru-hull Fittings - Propeller (Stainless) - Tee Top - Bottom Paint - Gel Coat - Bottom Paint - Gel Coat - Helm Console - Bottom Paint - Cabin Heat - Engine Cooling - Gel Coat - Radar Arch - Thru-hull Fittings (Bronze Sea Cocks) - Gel Coat (GOOD) - Thru-hull Fittings - Gel Coat - Cabin Heat (Small Cabin Heater) - Gel Coat - Bottom Paint - Gel Coat - Polling Platform - POWERPOLE - Propeller - Center Counsel - Cabin Heat - Gel Coat - Radar Arch - Cabin Heat - Propeller (Stainless Duoprop) - Bottom Paint - Engine Cooling (RWC) - Hard Top - Propeller (SS) - Gel Coat - Bottom Paint (Newly Painted) - Gel Coat (Good) - Propeller (Dual) - Toe Rail - Transom Height: 27" - Bottom Paint - Bottom Paint - Gel Coat (GOOD) - Propeller (Ss-4 BLADE) - Propeller (New) - Engine Cooling (Raw) - Flybridge - Gel Coat - Propeller (2) - Thru-hull Fittings - Bottom Paint - Power Engine Hatch - Propeller (Stainless) - Anchor - Bottom Paint - Engine Cooling (Raw) - Propeller (Bronze) - Engine Cooling - Helm Console - Gel Coat - Propeller (Aluminum) - Anchor - Stored In Covered Slip - Engine Cooling (Rwc) - Gel Coat - Propeller (Stainless X 2) - Radar Arch - Gel Coat (Reconditioned) - Propeller - Radar Arch - Anchor - Helm Console - Propeller - Stored Inside - Cockpit Type (Center Console) - Engine Cooling - Propeller (Stainless Steel) - Engine Cooling (Coolant - Internal Cooling System) - Gel Coat - Propeller (Stainless Steel) - Engine Cooling (Coolant - Internal Cooling System) - Gel Coat - Propeller (Stainless Steel) - Binnacle W/compass - Radar Arch - Gel Coat (GOOD) - Thru-hull Fittings - Propeller - Thru-hull Fittings - Tuna Tower - Water Heater (6 Gal) - Water Tank (50 Gal) - Fuel Capacity (350 Gal) - Gel Coat - Bottom Paint - Propeller (Stainless) - Power Engine Hatch - Lazarette /garage - Engine Cooling (Raw) - Gel Coat (Good) - Bottom Paint - Tower - Engine Cooling (RWC) - Gel Coat - Helm Console - Radar Arch (Fiberglass) - Gel Coat - Anchor - Engine Cooling (RWC) - Gel Coat - Helm Console - Stored Inside - Propeller (Yamaha Stainless) - Bottom Paint - Gel Coat - Anchor - Cockpit Type - Stern Pulpit
Deck Gear
- Four Stainless Steel Rod Holders Rod Tip Tubes Fore and Aft Under Gunwale Poly Rod Racks - 100% Composite Construction Fiber Glass Stringer Grid Self Bailing Cockpit Automatic Bilge Pump Casting Platform/Fish Box (Bow) Flush Anchor Locker Foam Flotation Four 12" Stainless Hand Rails Heavy Duty Rub Rail/SS Insert In Floor Storage Under Forward Casting Platform Non-Skid Gunwales a
Safety Equipment
- Bilge Pump - Fenders - Fire Extinguisher - First Aid Kit - Flare Kit