Related Searches

1973 30 (ft.) Bristol 30 SLOOP

Inactive - This listing is not for sale at this time

General Information

Listing# 149512

Price
$16,500.00
Location
Marion, MA, United States
Manufacturer
BRISTOL YACHTS
Boat Type
Sailboat
Model Year
1973
Category
Sloop
Designer
Halsey C. Herreshoff
Model
30 SLOOP
Status
Used
Length
30 (ft.)
Beam
110
LOA
360
Hull Material
Fiberglass

General Details

Halsey Herreshoff's Bristol 30 slashes through water with a clean, steady cut. No bobbing all over. Halsey designed the 30 with an extra long keel (rudder attached) to give you exceptional balance and response. No more over-steer or fighting the helm as in spade rudder configurations. And the 30's hollow waterline add that much more go.
The Bristol 30 also seems bigger than many other 30's. She's actually more comfortable , with lots of head room and a big roomy cockpit so the crew can speed up the action without bumping into each other.

Designer: Halsey C. Herreshoff
Displacement: 8400 lbs
Draft: (keel) 4' 6"
Beam: 9' 2"
Ballast: 3450 lbs (internal lead)
Sleeping capacity: 5
Sail Area: 402 sq ft
CCA Rating: 24.4 est
Power: 27 Hp Yanmar Deisel (1992)

This listing has now been on the market a couple months. Please submit any and all offers today!

At POP Yachts, we will always provide you with a TRUE representation of every vessel we market. We encourage all buyers to schedule a survey for an independent analysis. Any offer to purchase is ALWAYS subject to satisfactory survey results.

Take a look at ALL ***40 PICTURES*** of this vessel on our main website at POPYACHTS DOT COM. Thank you for visiting and we look forward to speaking with you!

Stock #51084

Specifications

Condition
The boat is shrink wrapped and I was only able to view the exterior and it appears to be in very good condition
Navigational Equipment
- Navigation Lights
Mechanical
- Ballast (3450 Lbs (internal Lead)) - Fuel Tank - Keel
Electrical Systems
- Battery
Accommodations
- Cabin Appointments - Cabins - Countertops - Dinette - Galley - Head - Stove
Construction
- Anchor (REGULAR AND STICK PIN) - Toe Rail (TEAK) - Gel Coat - Cockpit Type - Gel Coat - Bottom was last painted in 2011 - Transom Height (25") - Anchor (150 Ft Rode) - Bottom Paint (New 2013) - Engine Cooling (Freshwater) - Bottom Paint - Engine Cooling - Gel Coat - Thru-hull Fittings (SS) - Gel Coat (GOOD) - POWERPOLE - Thru-hull Fittings - Power Engine Hatch - Propeller (3-total) - Gel Coat - Stored Inside - Cockpit Type (Dual Console) - Stored Inside (Garage Kept) - Bottom Paint (New) - Gel Coat - Toe Rail - Cockpit Type (Deck) - Propeller - 26" Pontoons - Stainless Steel Package - Gel Coat - Bottom Paint - Gel Coat - Helm Console - Power Engine Hatch - Propeller (S/S) - Vent System - Engine Cooling (Rwc) - Gel Coat - Propeller (Alum) - Bottom Paint - Cabin Heat - Control Type (Livorski) - Engine Cooling - Gel Coat - Propeller (SS (3)) - Thru-hull Fittings - Factory Hull Scheme - Anchor - Bow Pulpit - Cabin Heat - Flybridge - Hard Top - Bottom Paint - Propeller (Brass X 2) - Cabin Heat - Radar Arch - Bottom Paint - Bottom Paint - Cabin Heat - Radar Mast - Bottom Paint - Cabin Heat - Power Engine Hatch - Radar Arch - Bottom Paint (PRIMOCON & HARD BOTTOM PAINTED(66%CUPROUS OXIDE)) - Engine Cooling (Freshwater) - Propeller (NEW NIBRAL PROPS-TUNED, PITCHED,CUPPED,COATED,) - Bottom Paint (Fresh) - Engine Cooling (Raw Water) - Gel Coat (Excellent) - Propeller (1-spare) - Propeller (Stainless) - Stored Inside - Thru-hull Fittings - Anchor - Gel Coat - Helm Console - Radar Arch - Bottom Paint - Bottom Paint (Black,) - Power Engine Hatch (Hydraulic) - Propeller (17'' Diameter, Starboard Clockwise, Port Is Counter Clockwise.) - Radar Arch - Bottom Paint (Last Application In 2012) - Flybridge - Bottom Paint - Tower - Stored Inside - Gel Coat - Propeller - Bow Scuff Plate - Gel Coat - Bottom Paint (Redone 2013) - Gel Coat - Radar Arch - Engine Cooling (Closed System) - Gel Coat - Bottom Paint - Bottom Paint - Gel Coat - Thru-hull Fittings - Anchor (Plow) - Gel Coat - Bow Scuff Plate - Bottom Paint - Lift Stored (Under Cover) - Bottom Paint - Engine Cooling - Gel Coat - Propeller (SS) - Thru-hull Fittings - Gel Coat - Engine Cooling (Raw) - Gel Coat - Propeller (BRONZE) - Anchor (Two) - Control Type (Dual) - Propeller (Stainless, Spare Prop) - Tee Top - Tower (W/ Controls) - POWERPOLE (Pro Series II) - Bottom Paint - Anchor - Bottom Paint - Flybridge - Hard Top - Radar Arch - Gel Coat - Bottom Paint - Engine Cooling (Fresh Water) - Keel Type (Full) - Gel Coat (Good) - Radar Arch - ~ Aluminum Hull - Bottom Paint - Cabin Heat - Gel Coat - Propeller (Twin Nibral) - Radar Arch - Anchor (2 Danforth) - Bottom Paint - Cabin Heat (Electric) - Helm Console - Propeller (3 Blade) - Starboard and Port side windows are all tinted. All wood blinds on the windows throughout - Binnacle W/compass - Gel Coat - Helm Console - Propeller (Duo Prop) - Stored Inside - Thru-hull Fittings - Anchor - Gel Coat - Propeller - Bottom Paint - Cabin Heat - Ballast - Bow Pulpit - Bottom Paint - Propeller (Stainless) - Engine Cooling (Raw) - Propeller (SS) - Bottom Paint - Cabin Heat - Engine Cooling - Propeller (Bronze) - Raised Helm Deck - Thru-hull Fittings - Bottom Paint (Salt Water Paint) - Cabin Heat - Propeller - Bottom Paint (Salt Water Paint) - Cabin Heat - Propeller - Gel Coat - Cockpit Type (2 Person) - Gel Coat (Original) - Gel Coat - Bottom Paint - Lazarette /garage - Engine Cooling (FWC) - Propeller (Bronze) - Tower - Tuna Tower - Bottom Paint - Gel Coat - Hard Top (CUSTOM) - Toe Rail - Bottom Paint - Flybridge - Propeller - Stored Inside - Bottom Paint - Helm Console - Propeller (Stainless) - Engine Cooling - Gel Coat - Helm Console - Propeller - Gel Coat - Bottom Paint - Bottom Paint - Propeller (2) - Radar Arch - Thru-hull Fittings - Bottom Paint - Engine Cooling (Raw Water) - Gel Coat (Good) - Bottom Paint - Binnacle W/compass - Bottom Paint - Power Engine Hatch - Binnacle W/compass - Bottom Paint - Power Engine Hatch - Binnacle W/compass - Bottom Paint - Power Engine Hatch - Anchor - Engine Cooling (RWC) - Gel Coat - Bottom Paint - Gel Coat (Black) - Lazarette /garage - Power Engine Hatch - Gel Coat - Propeller - Stored Inside - Transom Height: 27" - Gel Coat (Excellent) - Helm Console - Propeller - Anchor - Stored Inside - Engine Cooling - Gel Coat - Propeller - Bottom Paint - Engine Cooling (Open) - Gel Coat - Propeller (Dual Stainless Steel) - Thru-hull Fittings - Engine Cooling (Raw) - Gel Coat - Bottom Paint - Anchor - Propeller (SS) - Lazarette /garage (In Forward Deck. There Is Floor Storage.) - Propeller (Three Bladed 19 Pitch) - Thru-hull Fittings (All Stainless) - Transom Height: 30" - Bottom Paint - Gel Coat - Radar Arch - Cobia Tower - Propeller (2 Stainless Steel) - Tee Top - Thru-hull Fittings - Bottom Paint (June 2014) - Cockpit Type (Center) - Keel Type (Shoal) - Engine Cooling (FWC) - Gel Coat - Propeller (Bronze X 2) - Radar Arch - Thru-hull Fittings - Bottom Paint - Bow Pulpit - Bottom Paint - Propeller (Nibril) - Propeller (STAINLESS STEEL) - Bottom Paint - Engine Cooling (Raw) - Propeller (Bronze) - Engine Cooling - Helm Console - Bottom Paint - Propeller (Stainless Steel) - ~ Bottom Painted 4 Years Ago - Bottom Paint - Propeller - Radar Arch - Engine Cooling (Raw Water) - Gel Coat - Stored Inside - Anchor - Bottom Paint - Hard Top - Propeller (STAINLESS STEEL) - Radar Arch - Propeller (STAINLESS STEEL) - Thru-hull Fittings (GOOD) - Propeller (STAINLESS STEEL) - Thru-hull Fittings (GOOD) - Bottom Paint - Propeller (Painted Alum.) - Anchor - Bottom Paint (New) - Anchor - Gel Coat (GOOD) - Hard Top - Thru-hull Fittings - Engine Cooling (Raw Water) - Propeller (Stainless Steel) - Gel Coat - Propeller - Gel Coat - Gel Coat - Hard Top - Propeller - Tee Top - Thru-hull Fittings - Ballast - Engine Cooling - Gel Coat - Propeller (Aluminum) - Power Engine Hatch - Bottom Paint - Engine Cooling (Freshwater) - Gel Coat - Lazarette /garage - Radar Arch - Thru-hull Fittings - Propeller - Engine Cooling (Raw Water) - Gel Coat - Bottom Paint (Needs Re-done) - Engine Cooling - Gel Coat - Propeller - Thru-hull Fittings - Propeller (SPARE INCLUDED) - Thru-hull Fittings - Cabin Heat (WABASTCO) - Radar Mast - Propeller (SPARE INCLUDED) - Thru-hull Fittings - Cabin Heat (WABASTCO) - Radar Mast - Binnacle W/compass - Bottom Paint - Engine Cooling (Fresh Water) - Binnacle W/compass - Bottom Paint (2 Years Old) - Keel Type (Fin) - Gel Coat (GOOD) - Gel Coat - Propeller (Aluminum 4 Blade) - Engine Cooling - Bottom Paint - Hard Top - Anchor - Custom Exhaust (Captian Call) - Gel Coat - Propeller (S/S) - Bottom Paint (Fresh In Spring 2014) - Engine Cooling (Freshwater) - Radar Arch - Anchor - Gel Coat (Brand New!) - Ballast (Factory Ballast 3X) - Gel Coat (Custom Flake Gel Coat) - Tower (ZFT 4 Quick Release Tower) - Board Racks (Upgraded Swivel Board Racks) - Engine Cooling (Rwc) - Gel Coat - Power Engine Hatch - Helm Console - Propeller - Stored Inside - Engine Cooling (FWC) - Aluminum Hull - The Trophy is built with a cored fiberglass box beam stringer system, so you can expect many good years of use on this boat. She has lots of standard fishing features which you won't find with most models. - With no structural wood aboard-she's built with a cored fiberglass box beam stringer system-you can expect many years service and low maintenance. - When the fishing action eases off, the forward cabin offers a drop-down table that converts to a cushioned V-berth (there's more stowage underneath) and a portable toilet. The 2052 is a tough, comfortable package that can really bring in the fish! - Cockpit Type - Engine Cooling (Raw W/ Heat Exchanger) - Flybridge (Enclosed) - Propeller - Gel Coat - Anchor - Propeller
Sails
- Main