Related Searches

1967 27 (ft.) Chris-Craft 27 Commander Sportfisher

Save This Ad

General Information

Listing# 150807

Price
$16,500.00
Location
Tillamook, OR, United States
Manufacturer
Chris-Craft
Boat Type
Powerboat
Model Year
1967
Category
Sports Fishing Boats
Model
27 Commander Sportfisher
Status
Used
Length
27 (ft.)
Beam
108
LOA
324
Hull Material
Fiberglass
Fuel Type
unleaded
Engine Model
350
Number of Engines
1
Engine Type
Other
Engine Hours
479

General Details

Chris-Craft is a well established name in the boating community. Building boats for 140 years the name evokes thoughts of beautiful design, functionality, and quality construction. By 1971 Chris Craft completely phased out construction of mahogany wood hulls with the completion of the 57 foot Constellation model.

This 1967 Sport Fisher is not the first fiberglass hull as Chris Craft had been building glass boats since 1956. The hull is solid and the stringers are boxed fiberglass, no wood, although wood is found in the construction it is employed as support members. Mahogany is used throughout, however, in the cockpit bulkheads, the cabin, and trim.

The engine is a Kodiak 350 (GM) with electronic ignition. It is coupled with a Borg Warner Velvet drive and power is supplemented with a Honda 15 horse trolling motor for trolling but is powerful enough to push the boat at higher speeds. The out board has its own controls and can be fixed in place to steer with the rudder or with a custom tiller handle.

The cockpit is roomy and the deck panels can be removed to easily access the engine, the drive, and fuel tanks. The fly bridge is broad, and the boat is handily skippered from the helm station there.

The interior of the cabin sports a dinette to port, Helm station to starboard and a small galley area. A V berth is forward which contains the locker for the anchor rode, and a portable toilet. Canvas covers are included which covers the fly bridge and cockpit. The hull showed no major cuts or gouges and polishes out to good shine. The owner installed a heat and vent system in the engine space for use in the off season.

The trailer is custom built by the previous owner and is good condition. Each wheel has a brake.

Although the current owner has enjoyed the boat for many years and takes pride in her life changes dictate it is time to move on.

This listing has now been on the market a couple months. Please submit any and all offers today!

At POP Yachts, we will always provide you with a TRUE representation of every vessel we market. We encourage all buyers to schedule a survey for an independent analysis. Any offer to purchase is ALWAYS subject to satisfactory survey results.

Take a look at ALL ***65 PICTURES*** of this vessel on our main website at POPYACHTS DOT COM. Thank you for visiting and we look forward to speaking with you!

Stock #49073

Specifications

Condition
The boat is better than expected condition for her age. The current (and second) owner has taken good care of her.
Navigational Equipment
- CB Radio - Compass - Echo Sounder - Fish Finder - Plotter - Tachometer - Upper Helm Station - VHF - Windshield Wipers
Mechanical
- Bilge Blower - Bow Pulpit - Control Type - Cooling System - Cutlass Bearing - Engine Cylinders - Engine Flush - Engine Location - Fiberglass Stringers - Flybridge - Fuel Tank - Fuel Tank Location - Kicker Motor - Propulsion - Rudders - Strut
Electrical Systems
- 110v AC Outlets - 12 V DC Outlets - Alternator - Battery - Battery Location - Battery Switch - Gauges - Horn - Hour Meter - Ship's Power (12v DC) - Trolling Motor (2005 Honda 15) - Volt Meter - Water Temperature Gauge
Accommodations
- Berth - Cabinets - Dinette - Fridge - Handbasin - Porta-potty - Pressurized Water
Construction
- Cockpit Type (OPEN BOWRIDER) - Gel Coat (NICE) - Thru-hull Fittings - Bow Scuff Plate - Radar Arch (Radar Arch W/tv Antenna, Gps Antenna, Docking Lights, Flag Staff And Hailer.) - Plasteak (Plasteak On Molded Boarding Steps) - Anchor - Custom Exhaust (Captian Call) - Gel Coat - Propeller (S/S) - Gel Coat - Helm Console - Propeller - Gel Coat (GOOD) - Polling Platform - Tee Top - ~ Full Kevlar Hull - Bow Scuff Plate - Helm Console - Keel Type (V) - Propeller (5 Blade Stainless Steele) - Stored Inside - Thru-hull Fittings - Bottom Paint - Propeller (Brand New Mirage Plus) - Anchor - Propeller (2) - Stored Inside - Wake Board Rack - Anchor (2 Ea) - Bottom Paint - Bottom Paint - Cabin Heat - Gel Coat - Propeller (Bravo III) - Propeller - Gel Coat - Engine Cooling (Raw) - Gel Coat - POWERPOLE - Propeller (2) - POWERPOLE - ~ Aluminum Hull w/ Welded Seams ~ Integrated Tongue-and-groove hull design with continuous welded seams ~ Lifetime Warranty on Hull - Propeller (Stainless Steel) - Stored Inside - Gel Coat (Great Shape) - Propeller (Stainless Steel) - Stored Inside - Anchor - Gel Coat (Excellent) - Polling Platform - Radar Arch - Gel Coat - Cockpit Type (OPEN) - Gel Coat (GOOD) - Wakeboard Tower - Bottom Paint - Engine Cooling (Fwc) - Propeller - Radar Arch - Cabin Heat - Gel Coat - Flybridge - Additional construction features include a bow pulpit, transom door, reasonably wide side decks, and a swim platform. - Length................................. 28'0" Beam................................... 11'1" Draft.................................... 2'10" Weight........................... 10,300# Clearance............................ 9'11" - Fuel...............................150 gals. Water..............................51 gals. Waste..............................20 gals. Hull Type.................... Modified-V Deadrise Aft...........................10deg - Propeller (Stainless) - Bottom Paint - Gel Coat - Hard Top - Engine Cooling - Gel Coat - Propeller - Anchor - Gel Coat - Propeller (SS) - Ballast (3 Ballast Tanks (front-left-right)) - Propeller (2013 Acme 4 Blade) - Gel Coat - Helm Console - Power Engine Hatch - Bottom Paint - Cabin Heat - Gel Coat - Radar Arch - Gel Coat - Propeller - Thru-hull Fittings - Engine Cooling (RAW WATER) - Engine Cooling (FWC) - Flybridge - Propeller (2 X Bronze) - Bottom Paint (New Bottom Paint Will Be Applied This Winter) - Propeller (Stainless Steel 15.5 3 Blade / Spare Aluminum) - Anchor - Cabin Heat - Propeller - Binnacle W/compass - Anchor (Danforth) - Propeller (18'x19' 3 Blade Bronze) - Gel Coat - Helm Console - Bow Scuff Plate - Flybridge - Gel Coat - Propeller - Stored Inside - Wake Board Rack - Gel Coat - Bottom Paint (Needs New Bottom Paint) - Engine Cooling (Fresh Water Cooling) - Gel Coat - Keel Type (Full 3/4) - Vent System - Gel Coat - Propeller - Power Engine Hatch - Propeller - Stored Inside - Wakeboard Tower - Propeller (Bronze) - Wake Board Rack - Anchor - Gel Coat - Propeller (Stainless Steel) - Bottom Paint - Propeller (3 Blade) - Wake Board Rack - Propeller - Anchor - Control Type (Mercury) - Gel Coat - Tee Top - Gel Coat - Propeller - Stored Inside - Anchor - Stored Inside - Anchor - Bottom Paint - Propeller (STAINLESS STEEL) - Bottom Paint (New In 2013) - Engine Cooling (Closed) - Gel Coat - Binnacle W/compass - Propeller (3 Blade Bronze Rept.) - Gel Coat - Helm Console - Anchor - Wake Board Rack - Wakeboard Racks not currently on but has them. - Bottom Paint (1 Year Old) - Crow's Nest W/ Ladder - Propeller (Bronze 1 Yr Old) - Gel Coat - Bottom Paint (2010) - Control Type (VOLVO PENTA) - Gel Coat (NICE) - Thru-hull Fittings - Anchor - Ballast - Bottom Paint - Bow Pulpit - Cabin Heat - Bottom Paint (Has Been Maintained Each Season) - Flybridge - Gel Coat (Good Condition) - Propeller (Bronze) - Gel Coat - Radar Arch - Engine Cooling (Rwc) - Gel Coat - Anchor - Propeller (Mercury Vengeance) - Bottom Paint - Engine Cooling - Gel Coat - Propeller (Bronze) - Radar Arch - Bottom Paint - Binnacle W/compass - Engine Cooling (RWC) - Propeller (Stainless) - Radar Arch - Gel Coat - Gel Coat - Front Ballast - This boat has 3 ballast systems... Port Stern Starboard Stern Bow - Front Ballast - Engine Cooling - Propeller - Propeller - Wakeboard Tower - Wake Board Rack (2) - Tower Light - Fiberglass Swim Platform (Optional) - Hard Top - Tuna Tower - Gel Coat - Hard Top - Engine Cooling (Heat Exchange) - Bottom Paint (2011) - Engine Cooling (Raw Water) - Gel Coat - Cabin Heat - Helm Console - Radar Arch - Radar Arch - Cabin Heat (Reverse Cycle A/C) - Gel Coat (Currently Having The Boat Buffed Out) - Binnacle W/compass - Bottom Paint - Ballast (2400 Lbs) - Cabin Heat - Anchor - Gel Coat - Gel Coat - Helm Console - Propeller (2 Stainles) - Bottom Paint - Cabin Heat - Engine Cooling - Radar Arch - Cabin Heat - Propeller (3 Blade/fixed) - Keel Type (Iron/fin-bulb) - Anchor (Two) - Control Type (Dual) - Propeller (Stainless, Spare Prop) - Tee Top - Tower (W/ Controls) - POWERPOLE (Pro Series II) - Ballast (5100) - Helm Console - Propeller (Aluminum) - Bottom Paint - Hull: Kevlar and Glaass reinforced. Plastic vacuum molded and foam core with resin and gelcoat exterrior finish. Model Bow, reverse raked stern, Model Hull, Flush decks with fold out deck Wings - Keel: Elongated fin type bulb down 7' - Compartment: Transverse bulkheads fitted with limber holes and stainless steel fasteners - Bottom Paint - Cabin Heat (2 Fireplaces Electric) - Helm Console (All Original) - Propeller (Bronze 24" With 2 Spares) - Gel Coat - Propeller (2) - Bottom Paint - Lazarette /garage - Gel Coat - Hard Top - Stored In Covered Slip - Bottom Paint (Last Application Fall Of 2013) - Engine Cooling - Gel Coat - Helm Console - Propeller (1 Spare (stainless)) - Engine Cooling - Gel Coat - Helm Console - Propeller (1 Spare (stainless)) - Anchor - Tee Top - Bottom Paint - Flybridge - Bottom Paint - Gel Coat - Radar Arch - Cobia Tower - Gel Coat - Bottom Paint - Gel Coat - Tee Top (W/ Pfd Storage) - Bottom Paint - Radar Arch - Tee Top - Binnacle W/compass - Power Engine Hatch - Stored Inside - Anchor - Anchor - Bottom Paint - Propeller - Anchor - Bottom Paint - Propeller - Hull: The deep-sitting Supra Boats hull might sacrifice a bit of top-end speed for pure wake-shaping displacement, but isn't that what we're all looking for? And that drop-keel design is also great for knifing through double-ups and slicing through chop. - Hull: The deep-sitting Supra Boats hull might sacrifice a bit of top-end speed for pure wake-shaping displacement, but isn't that what we're all looking for? And that drop-keel design is also great for knifing through double-ups and slicing through chop. - Anchor - Gel Coat (Superb) - Helm Console - Propeller (Stainless) - Bottom Paint - Engine Cooling (Fresh Water Cooled) - Gel Coat (Glossy) - Radar Mast - Gel Coat - Helm Console - Radar Arch - Bottom Paint - Engine Cooling (FWC) - Flybridge - Propeller (Bronze) - Gel Coat - Propeller - Propeller (28 Pitch) - Ballast - Crow's Nest W/ Ladder - Tower - Anchor - Bottom Paint (Just FOR STEEL) - Engine Cooling (FWC) - Hard Top - Binnacle W/compass - Bottom Paint (2 Years Old) - Keel Type (Fin) - Engine Cooling (Rwc) - Stored Inside - Bow Pulpit - Engine Cooling - Flybridge - Helm Console - Hull (Solid, Hand Laid Glass, Deck Is A Balsa Sandwich Construction) - Bulkheads (Bonded To The Hull And The Stringers Are Glassed The Full Length) - Bottom Paint - Engine Cooling - Gel Coat - Helm Console - Propeller (1 Spare)
Deck Gear
- Anchor - Full Cover - Rod Storage
Safety Equipment
- Bilge Pump (1/1500 & 1/500) - Fire Extinguisher - Pfd's