Related Searches

1977 30 (ft.) Chris-Craft 30 Sport

Save This Ad

General Information

Listing# 151776

Price
$18,500.00
Location
Glen Cove, NY, United States
Manufacturer
Chris-Craft
Boat Type
Powerboat
Model Year
1977
Category
Express Cruiser
Designer
Ray Hunt
Model
30 Sport
Status
Used
Length
30 (ft.)
Beam
143
LOA
360
Fuel Type
unleaded
Engine Model
305
Number of Engines
2
Engine Type
Other
Engine Hours
0

General Details

For all of you Chris-Craft fans, notice the 30' Sportsman with the hull designed by legendary hull designer Ray Hunt. The engines are 250HP Marine Power engines that have recently been rebuilt married to (2) 
Props on straight drives which are undoubtedly nested within the Deep-V hull in order to 
achieve the unexpectedly shallow 32" draft on a boat with such a deep 
hull profile. With a mere 46 hulls built, this is a rather rare find and often sought after by Chris-Craft enthusiasts. Added to this boat is a custom tower with upper helm station. This is a nice upgrade to this boat. It sort of mimic's the sister vessel of the Sportsman, the Tournament Fisherman. If you are in the market for a classic rare fishing boat, you have found it here.

This listing has now been on the market 30 days. If you are thinking of making an offer, go ahead and submit it today! Let's make a deal!

At POP Yachts, we will always provide you with a TRUE representation of every vessel we market. We encourage all buyers to schedule a survey for an independent analysis. Any offer to purchase is ALWAYS subject to satisfactory survey results.

Take a look at ALL ***113 PICTURES*** of this vessel on our main website at POPYACHTS DOT COM. Thank you for visiting and we look forward to speaking with you!

Stock #52017

Specifications

Condition
This boat needs work. Bulkheads are rotting and need replacing. The hull is sound but there is a lot of work needed to redo her to her former glory.
Navigational Equipment
- Compass - Fuel Gauge - Navigation Lights - Spotlight - Tachometer - Upper Helm Station - VHF
Mechanical
- Bilge Blower - Engine Synchronizer - Rudders - Trim Tabs
Electrical Systems
- 110v AC Outlets - Battery - Circuit Breaker Panel - Cockpit Lighting - Gauges - Horn - Shore Power (110v. AC
Accommodations
- Berth - Cabin Lighting - Carpet - Dinette - Fridge - Head - Sink - Table
Construction
- Power Engine Hatch - Transom Height: 25" - Anchor - Gel Coat - Ski Pole - Anchor - Bottom Paint (None) - Engine Cooling (Fresh Water) - Custom Exhaust (Push Button Silent Choice) - Anchor - Gel Coat - Propeller - Flybridge - Additional construction features include a bow pulpit, transom door, reasonably wide side decks, and a swim platform. - Length................................. 28'0" Beam................................... 11'1" Draft.................................... 2'10" Weight........................... 10,300# Clearance............................ 9'11" - Fuel...............................150 gals. Water..............................51 gals. Waste..............................20 gals. Hull Type.................... Modified-V Deadrise Aft...........................10deg - Stored Inside - Gel Coat - Stored Inside - Gel Coat - Power Engine Hatch - Propeller (Dual Stainless) - Gel Coat - Bottom Paint - Bottom Paint - Engine Cooling (RWC) - Gel Coat - Propeller (X2) - Propeller (New Power Prop) - ~ Extra prop included - Binnacle W/compass - Bottom Paint - Bottom Paint (August 2013 With A 5 Year Paint!) - Cabin Heat - Cabin Heat - Engine Cooling (Raw) - Propeller (BRONZE) - Radar Arch - Helm Console - Propeller - Stored Inside - Cockpit Type (Center Console) - Bottom Paint - Gel Coat - Propeller - Bottom Paint (⦁ bottom Repainted May 2010-cleaned Every 4 Weeks) - Engine Cooling (Freshwater) - Propeller - Anchor - Bottom Paint (Needs Bottom Job Now) - Flybridge - Propeller (Brass, One Needs To Be Trued.) - Cockpit Type (Dual Console) - Stored Inside (Garage Kept) - Polling Platform - POWERPOLE - Propeller (4 Bladed Stainless) - Gel Coat (Excellent) - Helm Console - Propeller - Bottom Paint - Engine Cooling - Gel Coat (Excellent) - Propeller - Radar Arch - Thru-hull Fittings - Gel Coat - Binnacle W/compass (Stowed) - Bottom Paint (Feb, 2013) - Gel Coat (Great) - Keel Type (Shoal) - Propeller - Radar Mast - Propeller (Stainless) - Tee Top - Thru-hull Fittings - Gel Coat - Bottom Paint - Engine Cooling (RWC) - Gel Coat - Bottom Paint - Cabin Heat - Propeller (Just Reconditioned) - Radar Arch - Bow Scuff Plate - Propeller (3 Blade/fixed) - Keel Type (Iron/fin-bulb) - Bottom Paint - Lift Stored (Under Cover) - Bow Pulpit - Gel Coat - Propeller - Tower - Anchor - Gel Coat - Bottom Paint - Gel Coat - Propeller (Stainless) - Stored Inside (Garage Kept) - Helm Console - Power Engine Hatch - Propeller (S/S) - Vent System - Gel Coat (Good) - Radar Arch - Bottom Paint - Cabin Heat - Control Type (Livorski) - Engine Cooling - Gel Coat - Propeller (SS (3)) - Thru-hull Fittings - Factory Hull Scheme - Polling Platform - POWERPOLE - Propeller - Center Counsel - Bottom Paint (Salt Water Paint) - Cabin Heat - Propeller - Bottom Paint (Salt Water Paint) - Cabin Heat - Propeller - Gel Coat - Hard Top - Anchor - Bottom Paint - Engine Cooling (RWC) - Gel Coat - Tee Top (New Soft Top) - Gel Coat - Power Engine Hatch - Radar Arch - Power Engine Hatch - Bottom Paint - Gel Coat (Fair) - Engine Cooling - Gel Coat - Helm Console - Propeller - Bottom Paint - Bottom Paint - Engine Cooling (FWC) - Gel Coat - Propeller (X2 Bronze) - Thru-hull Fittings - Bottom Paint - Radar Arch - Anchor - Gel Coat (Fair) - Tee Top - Bottom Paint - Bottom Paint - Propeller (2) - Radar Arch - Thru-hull Fittings - Bottom Paint - Engine Cooling (Raw Water) - Gel Coat (Good) - Bottom Paint - Bottom Paint - Flybridge - Bottom Paint - Engine Cooling (FWC) - Gel Coat - Propeller (Bronze) - Radar Arch - Keel is 1/4 steel plating Gunwales and Deck are 3/16 steel plating Cabin walls are 1/8 steel plating Bulkheads are reinforced with I-beam 2' steel - Vessel is USCG rated for lakes Baays and Sounds - Tankage: 3 All Aluminum 500 gallon Tanks mounted centerline and gauged for consistent ballast. 1 tank is set up for Fuel and the other 2 are set up for water. 1 - 50 Gallon Waste Holding Tank 1 - 30 Gallon Hot Water Heater - Binnacle W/compass - Bottom Paint - Power Engine Hatch - Binnacle W/compass - Bottom Paint - Power Engine Hatch - Binnacle W/compass - Bottom Paint - Power Engine Hatch - Gel Coat (Very Good Condition) - Propeller (Stainless Steel) - Lazarette /garage (In Forward Deck. There Is Floor Storage.) - Propeller (Three Bladed 19 Pitch) - Thru-hull Fittings (All Stainless) - Transom Height: 30" - Anchor - Bottom Paint - Engine Cooling (RWC) - Gel Coat - Propeller - Bottom Paint - Engine Cooling (Raw Water) - Gel Coat (Good, Needs To Be Waxed) - Gel Coat (All White Premium Gelcoat Hull With Graphic Black) - Helm Console (Custom Molded Dashboard) - Bow Scuff Plate - Engine Cooling (Raw Water) - Power Engine Hatch (Gas Assist Struts To Support The Hatch In The Open Position) - Propeller (SC Single Propeller Drive With Exhaust Through The Propeller Hub And Cavitation Plate) - Thru-hull Fittings (Electro-polished Stainless Steel) - Keel Type (Extended V) - Bottom Paint - Engine Cooling (FWC) - Gel Coat - Propeller (Bronze) - Radar Arch - Bow Pulpit - Cabin Heat - Engine Cooling (Raw Water) - Propeller (Aluminum) - Gel Coat - Bottom Paint - Gel Coat - Tee Top (W/ Pfd Storage) - Bottom Paint - Anchor - Bottom Paint - Power Engine Hatch - Radar Arch - Bottom Paint (Black,) - Power Engine Hatch (Hydraulic) - Propeller (17'' Diameter, Starboard Clockwise, Port Is Counter Clockwise.) - Radar Arch - Anchor - Gel Coat - Gel Coat - Anchor - Propeller (Stainless) - Stored Inside - Thru-hull Fittings - Engine Cooling (Open) - Propeller (Stainless Steel 3 Blade) - Anchor - Control Type (DUAL YAMAHA) - Bottom Paint - Gel Coat - Tee Top - Bottom Paint - Bottom Paint (Less Than 1 Year Old) - Cabin Heat - Engine Cooling - Propeller (Retuned) - Tee Top - Gel Coat (Good) - Propeller (2 Stainless) - Tee Top - ---Structural/Warranty--- Composite Transom & Deck Core Five Year Stern to Stern Components Warranty Lifetime Structural Warranty on Hull, Stringer, and Transom NMMA Certified Premium Gel Coat - Stainless / Composite Thru-Hulls Sure-Trac Hull w/ Hand Laid High Performance Fiberglass Two Year Gel Coat Warranty Covering Crazing, Stress Cracks, Air Voids, Blisters Vinylester Barrier Coat Below Waterline - Bottom Paint - Engine Cooling - Propeller - Radar Arch - Gel Coat - Propeller - Transom Height: 27" - Cockpit Type (Center) - Keel Type (Shoal) - Gel Coat (TWO TONE) - Propeller (STAINLESS STEEL) - Thru-hull Fittings - Gel Coat (Beautiful) - Propeller (Not Even A Ding Mark) - Transom Height: 27" - Bottom Paint (PRIMOCON & HARD BOTTOM PAINTED(66%CUPROUS OXIDE)) - Engine Cooling (Freshwater) - Propeller (NEW NIBRAL PROPS-TUNED, PITCHED,CUPPED,COATED,) - Anchor - Anchor - Stored Inside - Gel Coat (GOOD) - Hard Top - Engine Cooling (Raw Water) - Propeller (SS) - Bottom Paint - Engine Cooling (RWC) - Propeller (Stainless) - Gel Coat - Engine Cooling (RWC) - Gel Coat - Anchor - Stored Inside - Thru-hull Fittings - Propeller - Tee Top (With Freshwater Misters) - Stainless Steel Drains - Propeller (STAINLESS STEEL) - Thru-hull Fittings (GOOD) - Propeller (STAINLESS STEEL) - Thru-hull Fittings (GOOD)
Deck Gear
- Anchor - Anchor Locker - Cockpit Seating - Courtesy Lights - Hard Top - Rocket Launchers - Rod Holders - Rod Storage - Spot Lights - Windshield - Windshield Wipers
Safety Equipment
- Bilge Pump - Fire Extinguisher - Grab Rail - Life Jackets - Searchlight