18m x 5m x 2.3m depth Aluminum Ambulance Boat - TO BE BUILT
59.04 ft x 16.4 ft x 7.55 ft depth
To be built in Trinidad
Hull is designed to comply with normal requirements within the oil industry for standby service and crew transportation in coastal waters from drilling platforms and for the provision of, for emergency medical care at sea, both near the coast and on high seas.
The hull is a single hull unit constructed with one deck, using marine aluminum alloys 5086-H116 for the hull and 6061 T6 for the structural elements.
Three transverse bulkheads will divide the hull in following compartments: fore peak, passengers' cabin, crew cabin, engine room and steering gear room.
The hull is designed to comply with the rules for the construction of High Speed Crafts, as established by the American Bureau of Shipping.
Gross tonnage: Approx 53.57 tons
Seating for 50 passengers in the lower forward cabin
Crew cabin will have 2 berths
Wheelhouse will have one seat for the Captain and two seats - one for crew member and one additional person
2 x Hyundai Model M6D35TI 500 hp ea
2 x 2:1 reduction gears
Fuel capacity: 484.81 US gallons
Speed: Minimum 24 knots
13 KVA diesel generator
Electronics: VHF radio, Raimara radar with GPS and depth sounder interface
magnetic compass, 2 search lights
Air conditioning supplied by six 10,000 BTU 110 Volt air conditioners
Water capacity: 392.96 US gallons
List of Medical Equipment included with vessel - on request
Price of this aluminum ambulance boat: on request
Reference No. W2253
- The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
- Scruton Marine Services - File No. W2253 Please contact Peggy Scruton at 519-583-1636 for further information