Related Searches

2013 65 (ft.) ALASKAN Flushdeck Wide Body

Inactive - This listing is not for sale at this time

General Information

Listing# 26620

Price
$2,750,000.00
Location
Unknown, Taiwan (Republic of China)
Manufacturer
ALASKAN
Boat Type
Powerboat
Model Year
2013
Category
Motor Yachts
Model
Flushdeck Wide Body
Status
New
Length
65 (ft.)
Beam
19.5
LOA
65
Hull Material
Fiberglass
Fuel Type
Diesel
Engine Model
C-18
Number of Engines
2
Engine Type
Inboard

General Details

This is the first Alaskan 65 to be delivered under the new ownership of Alaskan Yachts here in the U.S. The Flushdeck 65 has been the display vessel for the Ft. Lauderdale based company, and with the new arrival of a 2012 Raised Pilothouse late in the Summer, the price of this demonstrator has just been reduced $200,000.

Specifications

Construction
Boat deck drain system to waterline Cored 1 1/4" main bulkheads padded at hull, bonded as per schedule Four full length longitudinal engine stringers and athwartship reinforcing stringers (as per design) of foam cored laminated fiberglass Integrated swim ladder Hull to deck connection mechanically fastened and bonded, as per schedule Laminated vacuum bagged fiberglass reinforced with PVC rigid foam core in all hull and deck areas above the waterline and solid hand lay-up below the waterline Molded FRP interior and exterior window frames, reinforced windlass anchor platform, per plans Multiple Laminations at chine, keel and running hardware locations Underwater exhaust with bypass Uni-directional and bi-directional laminates at engine stringers and hull door openings Vinylester barrier hull laminate for osmosis protection
General
5" Ritchie compasses:one on flybridge, and one in pilothouse LED AC and DC lighting throughout interior, per plan with distribution panels at lower station, 5 point AC switches, 24 volt Air conditioning deflectors/covers at pilothouse for vents Bottom paint: two (2) coats of Micron CSC; five (5) coats Gelshield-2000 Condensation groove on all windows LED Courtesy lights exterior and interior Cruiseair air conditioning 230 volt AC/60 hz reverse cycle with SMX controls and remote compressors, five zone (5)  Electronic Glendinning controls at two stations Flybridge table in fiberglass Hynautic hydraulic steering Khalenberg double air horn Manship stainless steel  port lights with screens, per plan Multiple athwarship stringers Pilothouse table in teak, with folding leaf, stainless steel pedestal Spray rails Stainless steel destroyer wheel on flybridge Pompanette Platinum helm seat: two reclining backrest and adjustable armrests, stainless steel hardware, Hi-Lo adjustable pedestal with footrest, upholstered in "Naugahyde", located on Flybridge Pompanette Platinum helm seat: one reclining backrest and adjustable armrests, stainless steel hardware, Hi-Lo adjustable pedestal with footrest, upholstered in "Dura Touch", located in pilothouse Teak and stainless steel destroyer wheel in pilothouse Telephone stations, pre-wired, seven (7) Telephone/TV two inlets phone/cable TV inlet connectors fore and aft Tempered glass, front windows are 3/8" and side windows are 1/4" tinted Tinted flybridge Venturi wind screen with stainless steel frame Two-arm parallel windshield wipers with wash system, three (3) Windshield defrost ducts indirect rope lighting Head and galley ventilation - individual time delayed vent fans Security cameras - engine room/aft deck/bridge deck speced by yard
Deck
1 1/2" 316 stainless steel handrails with welded joints at forward deck and boat deck  1500 LB hydraulic davit 50 amp shore power connectors, two (20 forward and two (2) aft Single anchor roller/chock, 316 stainless steel 70 lb CQR /Bruce anchor with 2 1/2" HT chain (300') and anchor rode storage in divided chain locker 2 x anchor chain locker Aqua navigation lights (white finish) Breast plate - stainless steel Cabinet for storage or standard BBQ, flybridge FRP rails with 316 SS handrails Cleats, stainless steel, six (6) Conduit from mast to pilothouse for radar and antenna Eight (8) 24 volt DC stainless steel overhead dome lights on side and aft decks LED Flag staffs and sockets, bow and stern Flybridge, storage lockers and seating area made of formed fibergalss Flybridge seating with storage beneath with sunbrella cushions Foredeck seating with storage beneath and sunbrella cushions Fresh water at fore, aft, engine room, and boat deck Glenndinning cablemaster CM7with 75' (50 amp/220 volt) cable Halogen work lights on top of radar arch, two (2) Hardtop Hand rail on transom, 316 stainless steel, salon deck three horizontal rails Hawse holes with chocks, two (2) bow, two (2) amidship, two (2) transom (2) cleats on swim ladder Hinges and hardware for transom and hull doors, stainless steel Light and pennant mast, stainless steel Manship stainless steel/acrylic deck hatches, per plans Single Maxwell VWC-3500C single vertical windlass and chain pipe series, 24 volt DC Molded upper and lower rub rails capped with 1 1/4 stainless steel trim rail Non-skid on decks Pop-up swim platform cleats, stainless steel, two (2) Radar mast, custom molded, hinged for lowering Shore water fill at transom and bow Shower at swim platform in FRP cabinet Swim ladder, stainless steel (built in) Transom gate doors, port and starboard
Interior Finishes
All cabinetry is teak with hand rubbed satin finish All wall surfaces/bulkheads are teak veneer or wallpaper Cabin soles teak and holly in wheelhouse, galley and heads Countertops,AYI standard granite countertops at galley and heads Covers for interior switches and outlets are custom teak Fixtures/faucets, all Grohe including galley, heads and showers Foam cushions upholstered in Sunbrella fabric Formica or mirror headliner in heads Hanging cedar lined lockers with automatic lighting, vinyl interior Interior door hardware brushed stainless steel:  cabinets are chrome hinges with chrome or brass push/pulls; stainless steel dawgs, four (4) on pilothouse doors Mirrors are teak framed Red lights at pilothouse with dimmer switch, two (2) Refrigerator locks, hinged L-locks, two (2) stainless steel Shelves painted in lazarette Showers, FRP surface Sinks: galley-polar, double: heads, polar oval-stainless steel Vinyl headliner throughout (except heads) Teak outline framed pattern - salon through pilothouse
Engine Room
Engine room bulkheads and ceiling are sound shielded with soundown insulation.  Fuel tanks are faced with insulation and white aluminum clad hardboard.  Flooring is synthetic coin dot pattern. Additional two dome lights in blige ares Air intakes baffled to resist water induction Aqua bilge water alarm system Batteries are AGM and include; engine backs, 8D-204AH, four each engine four generator bank, 105H, one each; house banks, 8-D204AH, two Bilge areas finished smooth with white epoxy paint Bilge suction from port side engine, emergency Hydraulic bow/stern thrusters: 15 hp with dual station Breaker protection, AC and DC near each source in separate panels Bronze safety sea cocks on engine thru hull fitting Clean outs on all tanks Complete engine instrumentation at both stations Electric bilge pumps, Rule #2, 1500 GPH with floating switch, four (4) Engine beds of custom formed stainless steel Engine interconnect battery system Four (4) 24 volt DC engine room lights and four (4) AC lights FRP engine drip pans with drains, two (2) Fuel manifold system  (supply and return), stainless steel Fuel tanks, per plan at 1300 gallons total Fuel transfer system with manifold Full flow valves throughout Fresh water pump with accumulator Galvonic isolators for shore power inlets, two (2) Gauge system for fuel and water tanks, Hart Generator with sound shield, one 16kw Northern Lights (gauge panel in engine room) Generator with sound sheild, one 8kw Northern Lights Holding tank system, FRP, beneath sole, 100 gallon minimum Isolation transformers Manual bilge pump, Jabsco hand diaphragm pump Monitor panel, Sealand Oil change pump with manifold, Reverso Plastic tubing for fresh water Propeller shaft struts with cutlass bearings, stainless steel Propellers, bronze sized for H.P. Racor 75/1000MA dual filters for engines, two Racor 500MA dual filters for generators, two Rudder posts stainless steel rudder blades, stainless steel Sanitary hose used for all head discharge Sealand holding tank vent filter Sealand macerator discharge pump Sealand vacuum flush toilets Seaward model, 1900, 110 volt 18 gallon, stainless steel water heater 80 and 40 amp 12 volt battery chargers for 12 Volt and 24 Volt systems Shaft grounding brush Shower sump pumps, Rule #02, 15 00 GPH with 335 auto switch, two  Shut-off valves at all tank supply fittings  Hydraulic stabilizers with 6 sq. ft. fins, dual stations Stanchions stainless steel Supply lines from all tanks from aft lowest corner Tank watch monitor, Sealand (for holding tank) "Tides" dripless shaft seals - two per shaft Tiller, emergency Trace SW4024 4kw inverter with remote panel and two gel cell batteries Viewports at engine room door Warning light panels for pumps and navigation lights at wheelhouse station Water tank, one stainless steel, 300 gallon Water heater with heat exchange 25 gallon stainless steel Two sea chests
Appliances
Appliances are selected by client and can include: A) Standard G.E. Profile Performance Series: cook top, glass top, electric, dishwasher, microwave, convection oven, refrigerator/freezer / freezer with in-door ice and water, side-by-side, trash compactor. B) Frigidaire; front loading washer and dryer (choice of black, white or custom wood panels) Drawings supplied in the spec may show optional items. Appliance Allowance:  $20,000.00
Options
Teak blinds Teak and holly salon floor Underwater lights Dual anchor system Etched shower doors
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.