2007 140 (ft.) Custom

2007 140' x 40' x 2'5" to  9'10"  850 cu. yd. ABS Split Hull Dump Scow

ABS Load Line

Gross tonnage: 564 tons

Shell plating thickness: 1/2" to 4"

Remote control split hull dump scow

Headroom in engine room : 5'

Engine: John Deere 5030 - 99 hp = 60 hours

Used very little

Last survey: October, 2010

Located in Massachusetts

Additional Information: Built in 2007 of 1/2" hull, 5/8 hopper, very thick steel around hinge assembly's both above and bellow decks. ABS certified, Load line, 850 cubic yard capacity. Dimensions are 140' x 40' molded x 12'. Diesel HPU mounted inside all 1/2" steel engine room with ski light and single lever ABS door (starboard stern corner of deck). John Deere 5030 (roughly 70 hours since new) with fuel and oil tank integral with house. Remote control start, dump, close, and shut down with cruise feature and a range of 1,500 feet. Two 600,000 pound capacity stainless steel no-leak pistons. Emergency deployable 2,500lb Navy anchor on forward port bow. Silent inspector system currently installed. All Hydraulics supplied and installed by Pine Hill Equipment and Hydraulics.

Price reduced from $1,400,000 USD to $1,300,000 USD