Oceanis 30.1
30' / 9.14m

Buffalo , New York , United States
Beneteau: Oceanis 30.1
On order for Spring 2023! In Mast Furling, Twin Wheels, Bow Thruster, Electronics, A/C
Fiberglass Hull
Vessel ID# 2795693
$235,930 USD
€219,072 Euros
CA$318,525 CAD
£190,017 GBP


White Hull

Optional 21 HP Yanmar 3YM20 Diesel

Shoal Draft Keel

Two Cabin, One Head Version

White Oak Alpi Joinery

NEO (White) Fabric Upholstery in Salon

In-Mast Furling Mainsail

Electric Windlass with Remote Control

XL Swim Platform with Teak Decking

Double Steering Wheel Version

Tunnel Bow Thruster

Hot & Cold Cockpit Shower

3 Blade Folding Propeller

Reverse Cycle Air Conditioning and Heat


• Natural solid wood decked aft platform with manual opening

• Polyester drop-leaf cockpit table

• 2 Halyard bags

• Blinds / Mosquito Screens on 2 deck hatches

• Blackout curtains on hull portholes

• Curtains on coaming windows

• Curtains and mosquito screens on opening portholes of the aft cabin

• Galley: 12 V Refrigeration unit in icebox

• Stereo: Fusion player with Interior speakers & Waterproof exterior speakers

• Full 12/115 V Shore Power System

• 1 Internal socket on the electrical panel

• 1 USB socket in the cabins

• 25 Amp battery charger

• 1 80 Amp extra battery

• Shore power socket (less shore power cord to dock)

• Removable Synthetic Covering for Cockpit Sole

Raymarine Offshore Electronic Pack Coastal:

• Steering Console to Starboard

• I70s MFD on Starboard Console

• Axiom+ 7” MFD on Console

• Sensor (Log, Speedometer, Temperature)

• Wind Sensor (Windvane, Anemometer)

• Windex Windvane

• Ray73 VHF at Chart Table with AIS Receiver Function

• P70S Autopilot with Control at Helm Station

Rigging Pack Upwind-Downwind:

• 2 Genoa winches (H35.2 STA)

• 1 Self tailing maneuvering winch (H20.1 STA) on the roof (starboard) & Stoppers

• Asymmetrical spinnaker rigging with Halyard

• Polyester bowsprit with integrated anchoring gear

• Bobstay (for Code 0 and asymmetric spinnaker use)

• Genoa sheet tracks on side decks

• Furling Dacron genoa (to replace the standard self-tacking jib)

Dealer-Supplied Options & Services:

Freight from POE to Buffalo

Launching, Rigging & Commissioning

Anti-Fouling Bottom Paint System

Custom Steel Cradle

Safety Gear Pack

Docking Pack

Anchor Pack

Name and Port Installed


With unbeatable living space for its size and a focus on simplicity of use, the smallest model of the cruising range is nevertheless stylish, and fast, with a highly competitive ready-to-sail price.


With a stemhead and her hard-chine hull and well-proportioned sides and coachroof, the Oceanis 30.1 looks unashamedly like a small yacht. The Finot-Conq plan has met the double challenge of power and simple navigation. With her slender bow, optimized weight, stiff canvas and square-top mainsail, she performs well in all points of sailing. For beginners or for short-handed sailing, the self-tailing jib and the single winch make her easy to handle. For performance, the Oceanis 30.1 has a large overlapping genoa, a furling code zero and an asymmetric spinnaker. Aft, a step affords access to the sea and can be supplemented by a small lifting platform.


With a few extra centimetres won in strategic places the Oceanis 30.1 differs from other boats, thanks to a headspace of 1.98 m in all the places inside where it is comfortable to stand. The two good-sized double cabins each have berths running lengthwise and an open entryway making them feel particularly spacious. The two benches in the saloon provide an additional place for two extra berths. The large shower room is divided into a marine toilet on one side and shower and washbasin on the other. At the foot of the gently sloping companionway, the L-shaped galley has top and bottom storage, a 75-litre refrigerator and a real oven under the gas stove.

Data Sheet
LOA 30' (9.14 meters)
Type power
Year 2023
Fuel Type Diesel
Hull Material Fiberglass


For more information about this vessel, please contact Tim Finkle CPYB.
We look forward to working with you!

Want more information?

Tim Finkle CPYB

Sales & Marketing Manager
223 Lockport Street
Youngstown New York 14174 United States
Cell: 1-860-917-5416

Tim joined RCR Yachts in February 2014. He grew up in Youngstown, learning to sail in the Youngstown YC Jr. Sailing program. After leaving the area to attend Connecticut College and then work in New York City for 8 years, he decided to move home and follow his passion for boating. He actively races his J/70 “Junior” all over the country and locally as a member of the Youngstown Yacht Club, where he is on the board of directors. He is the co-chair of the CanAm Challenge that hosts a one-design regatta each July at YYC. Tim is also on the board for Sail America. He works out of the Youngstown and Buffalo offices and lives in Lewiston with his wife Aly and kids Cole & Louise.